Read Sharp HT-SB400H (serv.man2) User Guide / Operation Manual online
18
HT-SB400
2009 August 7
HT-SB400_A6_EN_1-17.fm
Ref
erences
Maintenance
■ Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth.
Caution:
●
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may
damage the cabinet finish.
damage the cabinet finish.
●
Do not apply oil to the inside of each component. It may cause
malfunctions.
malfunctions.
Error indicators and warnings
When you fail to perform operations properly, the following messages are
displayed on the speaker.
displayed on the speaker.
(*): Should the same message appear even if the speaker is unplugged and
plugged in, or is set to the stand-by mode and on again, contact your
local dealer where you purchased the speaker.
local dealer where you purchased the speaker.
Specifications
As part of our policy of continuous improvement, SHARP reserves the right
to make design and specification changes for product improvement without
prior notice. The performance specification figures indicated are nominal
values of production speaker. There may be some deviations from these
values in individual speaker.
■ General
(*) This power consumption value is obtained when in the touch sensing off
mode.
Display
Meaning
or
or
●
Malfunction of the surround
circuit. Place the speaker away
from noise source and plug the
AC power lead into another wall
socket. (*)
circuit. Place the speaker away
from noise source and plug the
AC power lead into another wall
socket. (*)
or
Power indicator
(blinks red)
●
When the protection circuit of the
amplifier is activated.
amplifier is activated.
SOUND BAR SYSTEM HT-SB400
SOUND BAR SYSTEM HT-SB400
VOL
VOL
STANDARD
STANDARD
SPORT
SPORT
NEWS
NEWS CINEMA/GAME
CINEMA/GAME
FUNCTION
FUNCTION
ON/STAND-BY
ON/STAND-BY
VOL
VOL
Power source
DC IN 12V
4A: AC/DC adaptor
(AC 100 - 240 V ~ 50/60 Hz)
Power
consumption
Power on: 12 W
Power Stand-by: 0.6 W (*)
Output power
Front Speaker:
RMS: 10 W (5 W + 5 W) (10% T.H.D.)
RMS: 9.6 W (4.8 W + 4.8 W) (0.9% T.H.D.)
Centre Speaker:
RMS: 7 W (10% T.H.D.)
RMS: 6.5W (0.9% T.H.D.)
Subwoofer:
RMS: 15 W (10% T.H.D.)
RMS: 9.8 W (0.9% T.H.D.)
Speaker
3.1-way Speaker System
Front Speakers: 40 mm (1-9/16") Full Range (x 2)
Impedance: 12 ohms / Channel
Centre Speakers: 40 mm (1-9/16") Full Range (x 2)
Impedance: 6 ohms
(12 ohms x 2 parallel connections)
Subwoofer: 57 mm (2-1/4") Woofer (x4)
Impedance: 3 ohms
(12 ohms x 4 parallel connections)
Audio output
terminals
Subwoofer Pre Out: 10 k ohms
Input terminals Analogue input (LINE 1): RCA type x 1pair (L/R)
500 mV/47 k ohms
Analogue input (LINE 2): Stereo mini socket Ø 3.5 mm
100 mV/47 k ohms
Dimensions
Width: 985 mm (38-3/4")
Height: 96 mm (3-3/4")
Depth: 70 mm (2-3/4")
Weight
2.15 kg (4.74 lbs.)
Click on the first or last page to see other HT-SB400H (serv.man2) service manuals if exist.