Read Sharp HT-DV40H (serv.man4) Service Manual online
HT-DV40H
2 – 2
[2] Test Mode
1.Test Mode Functions
1.1.Entering the Test Mode
While holding down both the n button and the POWER button of the main unit from the AC Supply Off state, turn the
AC Supply ON to enter the Test Menu Mode.
While holding down both the n button and the POWER button of the main unit from the AC Supply Off state, turn the
AC Supply ON to enter the Test Menu Mode.
[ < ] + [ POWER ] [ AC ON ]
1.2.TEST Mode Processing
* When entering the TEST Mode, the ROM version are displayed as follows.
* System micom version on the FL display upper row : HDH**** ( **** : Version No )
* DVD Firmware version on the FL display lower row : SRCV** ( ** : Version No )
* When entering the TEST Mode, the ROM version are displayed as follows.
* System micom version on the FL display upper row : HDH**** ( **** : Version No )
* DVD Firmware version on the FL display lower row : SRCV** ( ** : Version No )
1.3.TEST Mode button
* Press direct designation button or turn VOL Jog during the version display to enter the specified TEST Mode as
* Press direct designation button or turn VOL Jog during the version display to enter the specified TEST Mode as
shown below.
* exit test mode by POWER key during micom version display
1.4.Canceling TEST Mode
Press the ON / STAND-BY button in each TEST Mode.
Press the ON / STAND-BY button in each TEST Mode.
TEST MODE
TEST MODE
PROCEDURE TO ENTER
TEST 15
DVD TEST
Turn VOL Jog to select "DVD TEST" during version
display, then press [STOP] key to enter.
TEST 16
FIRMWARE UPDATE TEST
Direct press [PLAY] key during version display.
Click on the first or last page to see other HT-DV40H (serv.man4) service manuals if exist.