HT-DV40H (serv.man3) - Sharp Audio User Guide / Operation Manual. Page 72

HT-DV40H
HT-DV50H

Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.

The volume will increase gradually until it reaches the preset
volume.

The timer will be cancelled.
The “

” indicator will blink during timer playback.

The timer will operate at the same time every day. It will
continue until the daily timer setting is cancelled. Cancel the
daily timer when it is not in use.
The “DAILY 

” indicator will blink during timer playback.

When performing timer playback using another unit connected to the
USB  terminal/OPTICAL 1/OPTICAL 2/AUX IN/SCART  sockets,
select USB or OPTICAL 1 or OPTICAL 2 or AUX or SCART in step 8.
This unit will turn on or enter the power stand-by mode automatically.
However, the connected unit to USB terminal/OPTICAL 1/OPTICAL
2/AUX IN/SCART sockets will not turn on or off.

1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the 

 or 

 button to select “ONCE”

or “DAILY”, and press the MEMORY/DIMMER button. 

3 Within 10 seconds, press the 

 or 

 button to select “ONCE

CALL” or “DAILY CALL”, and press the MEMORY/DIMMER
button. 
The unit returns to the timer stand-by mode after displaying the
settings in order.

1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the 

 or 

 button to select “ONCE”

or “DAILY”, and press the MEMORY/DIMMER button. 

3 Within 10 seconds, press the 

 or 

 button to select “ONCE

OFF” or “DAILY OFF”, and press the MEMORY/DIMMER button. 
Timer will be cancelled (the setting will not be cancelled).

1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the 

 or 

 button to select “ONCE”

or “DAILY”, and press the MEMORY/DIMMER button. 

3 Within 10 seconds, press the 

 or 

 button to select “ONCE

ON” or “DAILY ON”, and press the MEMORY/DIMMER button. 

4 Press the ON/STAND-BY button to enter the power stand-by

mode.