Read Sharp HT-CN410DVH (serv.man2) Service Manual online
after sales service only.
The contents are subject to change without notice.
its original condition and only parts identical to those
specified be used.
CN410DVH (main unit), CP-CN410F (front speakers), CP-
CN410C (centre speaker), CP-CN410R (surround
speakers) and CP-CN410SW (subwoofer).
may cause damage or accident due to cracks.
or service branch in your area.
time. However, Since the land may be peeled off or the maximum heat-resistance temperature of parts may be exceeded,
remove the bit from the PWB assoonas you confirm the steady soldering condition.
Lead-free solder contains more tin, and the end of the soldering bit may be easily corrected. Make sure to turn on and off the
power of the bit as required.
If a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Clean the bit after every use
When the tip of the soldering bit is blackened during use, file it with steel wool or fine sandpaper.
LED PWB" of this model employs lead-free solder.
The LF symbo lindicates lead-free solder,and is attached on the PWB and service manuals.The alphabetical character
following LF shows the type of lead-free solder.
for this model is specified to be lower than Class 1 Require-
ments. However, the following precautions must be observed
during servicing to protect your eyes against exposure to the
outer than the lead-in position, the Laser will light for sev-
eral seconds to detect a disc. Do not look into the Pickup
in hazardous radiation exposure.
Wavelength: 785 nm/650 nm
Emission Duration: continuous
Laser Output: max. 0.6 mW
WARNUNG: SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG
ATTENTION: RAYONS LASER VISIBLE ET INVISIBLE EN CAS
for product improvement without prior notice. The performance specification figures indicated are nominal values of
production units. There may be some deviations from these values in individual units.
Height: 55 mm
Depth: 360 mm
Analogue input (IN 2): RCA type × 1 pair (L/R)
Headphone: 16-50 ohms (recomended: 32 ohms)
Digital output: Caoxial type x 1
Video output: RCA type × 1
Component video output: P
CD-R, CD-RW, MP3
(sampling rate: 48 kHz)
20 Hz to 20 kHz
(sampling rate: 96 kHz)
CD: 20 Hz to 20 kHz