Read Sharp HT-CN300H User Guide / Operation Manual online
13
HT-CN300H_(E)2.fm
02/5/22
HT-CN300H
Connections
- Connecting other
equipment -
„
Connecting the TV
Connect the TV to the main unit with the supplied video cable. If your TV has S-video
input socket, connect the commercially available S-video cable to enjoy clearer
images on DVDs.
input socket, connect the commercially available S-video cable to enjoy clearer
images on DVDs.
Notes:
z
Change the TV input in accordance with the connected socket.
z
Do not connect other equipment between the TV and this unit. If they are con-
nected via a VCR, pictures may be distorted.
nected via a VCR, pictures may be distorted.
z
When the video and S-video cables are both connected, the images from the S-
video input socket appears on your TV.
video input socket appears on your TV.
Caution:
The settings appear only when the TV is connected with a video cable. They
will not appear when the TV is connected with an S-video cable.
During the tuner or auxiliary mode, the TV screen display will not be shown.
(See page 25 for the TV screen display.)
will not appear when the TV is connected with an S-video cable.
During the tuner or auxiliary mode, the TV screen display will not be shown.
(See page 25 for the TV screen display.)
Connecting the TV with SCART socket:
Use a supplied SCART adptor.
„
Connecting the DVD player
Use the video cable or the S-video cable for receiving images. The S-video cable can
realise clearer images. For audio, connect with the optical digital cable or the coaxial
digital cable.
realise clearer images. For audio, connect with the optical digital cable or the coaxial
digital cable.
To connect to the video socket with the video cable:
Note:
When connecting a DVD player with a video cable, be sure to use another video
cable for the TV.
cable for the TV.
To connect to the S-video socket with the S-video cable:
Note:
When connecting a DVD player with a S-video cable, be sure to use another S-video
cable for the TV. This unit cannot convert the S-video signal into the video or other
signals.
cable for the TV. This unit cannot convert the S-video signal into the video or other
signals.
Switching the DVD audio input:
Switch the DVD's audio signal with the remote control according to the connected
socket, "DIG1" (optical) or "DIG2" (coaxial) (see page 20).
socket, "DIG1" (optical) or "DIG2" (coaxial) (see page 20).
Caution:
Turn off all other equipment before making this connection.
Notes:
z
Refer to the operation manual of the equipment to be connected.
z
Insert the plugs fully to avoid fuzzy pictures or noise.
TV
Video cable (supplied)
To video input socket
To S-video input socket
S-video cable
L
AUDIO
VIDEO
R
To video input socket
To SCART
socket
SCART adaptor
Video cable (supplied)
IN
TV
Optical digital socket cap:
When using the optical digital socket, remove the cap
first. After using the socket, replace the cap.
first. After using the socket, replace the cap.
Video cable
To video output socket
Optical digital audio cable
Coaxial digital
audio cable
DVD player
To S-video output socket
Optical digital audio cable
Coaxial digital
audio cable
audio cable
DVD player
S-video cable
Click on the first or last page to see other HT-CN300H service manuals if exist.