Read Sharp GX-BT3 (serv.man2) User Guide / Operation Manual online
E-4
Power Source
AC power connection
Note:
Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
Bluetooth stand-by mode
The first time the unit is plugged in, the unit will enter
the Bluetooth stand-by mode. Pairing indicator will light
up.
To cancel the Bluetooth stand-by mode, press the ECO
MODE button (remote control) during Bluetooth stand-
by mode. The unit will enter the low power consump-
tion mode.
To return to the Bluetooth stand-by mode, turn the unit
on and off again.
During Bluetooth stand-by mode, the unit will turn on if
Bluetooth connection is established.
MUTE
ON/
STAND-BY
TREBLE
AUDIO IN
BASS
PAIRING
VOL
X-BASS
USB
BLUETOOTH
DIMMER
RRMCGA342AWSA
ECO MODE
ECO MODE
Wall socket
AC 100 - 240 V ~
50/60 Hz
Battery installation
While pushing the locking tab towards the centre of
the remote control, slide out the battery holder.
Back of remote
control
Locking tab
2
Remove the old battery from the battery holder, insert
the new battery and then slide the battery holder back
into the remote control.
Positive (+)
side up
Battery holder
Polarity (+)
symbol
Battery type
Locking tab
Precautions for battery use:
Remove the battery if the unit will not be used for a long
period of time.
This will prevent potential damage due to battery leakage.
Caution:
Caution:
Do not use rechargeable battery (nickel-cadmium bat-
tery, etc.).
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, fire
or the like.
Installing the battery incorrectly may cause the unit to
malfunction.
Notes concerning use:
Replace the battery if the operating distance is reduced
or if the operation becomes erratic. Purchase “CR
2025”, coin lithium battery.
Periodically clean the transmitter on the remote control
with a soft cloth.
Exposing the sensor on the unit to strong light may in-
terfere with operation. Change the lighting or the direc-
tion of the unit if this occurs.
Keep the remote control away from moisture, heat,
shock, and vibrations.
Test of the remote control
The remote control can be used within the range shown
below:
MUTE
ON/
STAND-BY
TREBLE
AUDIO IN
BASS
PAIRING
VOL
X-BASS
BLUETOOTH
DIMMER
RRMCGA342AWSA
ECO MODE
Remote sensor
0.2 m - 6 m
(8” - 20’ )
Remote control
Click on the first or last page to see other GX-BT3 (serv.man2) service manuals if exist.