GX-BT3 (serv.man2) - Sharp Audio User Guide / Operation Manual. Page 11

■

Sudden  temperature  changes,  storage  or  operation  in 
an  extremely  humid  environment  may  cause  condensa-
tion inside the cabinet or on the transmitter on the remote 
control. Condensation can cause the unit to malfunction. 
If this happens, leave the power on until normal playback 
is possible (about 1 hour). Wipe off any condensation on 
the transmitter with a soft cloth before operating the unit.



When this product is subjected to strong external inter-
ference  (mechanical  shock,  excessive  static  electricity, 
abnormal supply voltage due to lightning, etc.) or if it is 
operated incorrectly, it may malfunction.
If such a problem occurs, do the following:

  Set the unit to the stand-by mode and turn the power 

on again.

2  If the unit is not restored in the previous operation, un-

plug and plug in the unit again, and then turn the power 
on.

Note:
If neither operation above restores the unit, clear all the 
memory by resetting it.



  Press the AUDIO IN (remote control) or FUNCTION but-

ton repeatedly (main unit) to select AUDIO IN function.

2  Press  /  button.

3  Within 1 second, press and hold 

 button until PAIR-

ING indicator lights up.

Caution:
This operation will restore the unit to factory default con-
dition.



Caution:
Remove device plugged in to the unit. Then, set the unit 
to the power stand-by mode. Transporting the unit with 
other device plugged in might damage the units.

■

Periodically wipe the cabinet with a soft cloth and a di-
luted soap solution, then with a dry cloth.
Caution:


  Do not use chemicals for cleaning (petrol, paint thinner, 

etc.). It may damage the cabinet.



  Do not apply oil to the inside of the unit. It may cause 

malfunctions.

As part of our policy of continuous improvement, SHARP 
reserves  the  right  to  make  design  and  specification 
changes  for  product  improvement  without  prior  notice. 
The performance specification figures indicated are nomi-
nal values of production units. There may be some devia-
tions from these values in individual unit.

■

AC 100 - 240 V ~ 50/60 Hz

AC:  Power on: 5 W
 

Power stand-by: 0.4 W (*)

Width: 446 mm (17 - 9/16’’)
Height: 155 mm (6 - 1/8”)
Depth: 154 mm (6 - 1/16”)

2.5 kg (5.5 lbs.) 

2.400GHz - 2.480GHz

Bluetooth Profile

A2DP (Advanced Audio 
Distribution Profile), AVRCP (Audio/
Video Remote Control Profile)
Bluetooth 2.1 +EDR

( * )  This power consumption value is obtained when the 

Bluetooth  stand-by  mode  is  cancelled  in  the  power 
stand-by mode. Refer to page 4 to cancel the Blue-
tooth stand-by mode.

■

Front speaker:
MPO: 10 W (5 W + 5 W)
RMS: 10 W (5 W + 5 W) (10% 
T.H.D.)
RMS: 7 W (3.5 W + 3.5 W) (1% 
T.H.D.)
Subwoofer:
MPO: 14 W
RMS: 10 W (10% T.H.D.)
RMS: 8 W (1% T.H.D.)

Audio In (audio signal):
500 mV/47 k ohms

■

2-way type speaker system
Front Speakers:
5 cm (2”) - 3 Ω - Full Range
Subwoofer: 8 cm (3-1/8”) - 6 Ω 
- woofer

Front Speakers: 10 W / Channel
Subwoofer: 10 W / Channel

Front Speakers: 5 W / Channel
Subwoofer: 5 W / Channel