Read Sharp FV-DB1E (serv.man2) User Guide / Operation Manual online
9
FV-DB1E
04/4/12
FV-DB1E_1.fm
TINSEA025SJZZ
D
AB (Digi
tal A
udio
Br
oa
dcasting
) Operati
o
n
"
Retuning the unit (Auto tune)
You can retune the radio when you move the unit to other areas or
add multiplex channels to the station list.
There are two Auto tune options available.
add multiplex channels to the station list.
There are two Auto tune options available.
After the scan:
The unit will return to the station you were listening to and you will
hear it through the speaker. All the stations found are now stored in
the unit.
The unit will return to the station you were listening to and you will
hear it through the speaker. All the stations found are now stored in
the unit.
"
Selecting a station in the station list
Once a DAB station is received, you can select stations in the sta-
tion list.
tion list.
Note:
Inactive stations cannot be received by Auto tune ("Not available"
appears). Tune in manually by adjusting the aerial direction (see
page 10).
Inactive stations cannot be received by Auto tune ("Not available"
appears). Tune in manually by adjusting the aerial direction (see
page 10).
Autotune UK: All frequencies are scanned in the UK channel allo-
cation. This may take a few seconds.
Autotune Full: The full range of digital frequencies is scanned in
Band III. This may take a minute or more.
1
Press the BAND button until "DAB" ap-
pears on the display.
pears on the display.
2
Autotune UK:
Press the AUTO TUNE button for less
than 1 second.
than 1 second.
Autotune Full:
Hold down the AUTO TUNE button for 2
seconds or more.
seconds or more.
You can cancel the Auto tune by pressing the AUTO TUNE but-
ton again.
ton again.
1
Press the BAND button until "DAB" appears on the display.
2
Whilst receiving a DAB station, press the TUNING ( or )
button repeatedly to select the desired station.
button repeatedly to select the desired station.
!
The upper part of the display shows the current station
name, and the name of the station being scanned (with "
name, and the name of the station being scanned (with "
") appears in the lower part.
The current station name
The name of the station being scanned
!
If a station has one or more secondary
services, " " appears after to the station
name. You can select a secondary ser-
vice.
services, " " appears after to the station
name. You can select a secondary ser-
vice.
!
Whilst selecting a secondary service,
" " appears before the station name.
This indicates a primary service is avail-
able.
" " appears before the station name.
This indicates a primary service is avail-
able.
3
Within 30 seconds, press the ENTER button.
!
When the current station is primary with secondary, "P" lights
up.
up.
!
When the current station is secondary, "S" lights up.
!
When the current station is primary without other services,
no indicator lights up.
no indicator lights up.
3
Click on the first or last page to see other FV-DB1E (serv.man2) service manuals if exist.