Read Sharp FV-DB1E (serv.man2) User Guide / Operation Manual online
16
FV-DB1E
04/4/12
FV-DB1E_2.fm
TINSEA025SJZZ
A
d
v
a
n
ced Fea
tures
Alarm operation (continued)
To cancel the alarm setting:
Press the ON/STAND-BY button whilst " " is indicated.
To cancel the alarm operation without setting the unit to the stand-by
mode, press the CLOCK button until "Alarm off ok?" appears on the
display, then press the ENTER button.
Press the ON/STAND-BY button whilst " " is indicated.
To cancel the alarm operation without setting the unit to the stand-by
mode, press the CLOCK button until "Alarm off ok?" appears on the
display, then press the ENTER button.
To reset or change the alarm setting:
Perform "Alarm operation" from the beginning (see page 15).
Perform "Alarm operation" from the beginning (see page 15).
Notes:
"
The alarm operates at the same time every day until the setting is
cancelled. Cancel the alarm when it is not in use.
cancelled. Cancel the alarm when it is not in use.
"
If the unit is unplugged or a power failure occurs in the alarm
stand-by mode, the " " indicator turns off and the alarm setting is
cancelled.
stand-by mode, the " " indicator turns off and the alarm setting is
cancelled.
"
During the sleep operation, the alarm setting is not available.
Sleep operation
When the set time elapses, sound is muted with the power on.
Before setting sleep:
Before setting sleep:
Stopping the alarm:
Press the ON/STAND-BY button.
About snooze function:
You can pause the alarm sound by press-
ing buttons other than the ON/STAND-BY
button. In this case, the alarm resumes af-
ter 7 minutes.
ing buttons other than the ON/STAND-BY
button. In this case, the alarm resumes af-
ter 7 minutes.
The remaining time also appears.
Tone:
The alarm stops after 5 minutes when the snooze is not used. If
you use the snooze repeatedly, the alarm will be disabled after 1
hour.
you use the snooze repeatedly, the alarm will be disabled after 1
hour.
Radio:
The alarm will be disabled after 1 hour.
For the sleep operation, connect the AC adaptor to the unit.
If batteries are the only power source, setting is not possible
(see page 6).
If batteries are the only power source, setting is not possible
(see page 6).
1
Press the CLOCK button repeatedly to
select "Set sleep".
select "Set sleep".
2
Within 30 seconds, press the TUNING
( or ) button to select the desired
sleep time.
( or ) button to select the desired
sleep time.
"
Select set time from 1 - 120 minutes by
the minute.
the minute.
"
Press the TUNING ( or ) button once to advance the time
by 1 minute. Hold it down to advance continuously.
by 1 minute. Hold it down to advance continuously.
3
Within 30 seconds, press the ENTER
button.
button.
"
" " will light up.
"
Remaining time is displayed during the sleep operation.
"
The volume gradually decreases for the last 1 minute.
4
Sound will be muted after the set time
elapses.
elapses.
" " turns off.
To stop the sleep operation:
Press any button on the unit
whilst "Sleeping" is displayed.
Press any button on the unit
whilst "Sleeping" is displayed.
Sleep operation stops.
To cancel the sleep setting:
Press the ON/STAND-BY button whilst " " is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, press the CLOCK button until "Sleep off ok?" appears on the
display, then press the ENTER button.
Press the ON/STAND-BY button whilst " " is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, press the CLOCK button until "Sleep off ok?" appears on the
display, then press the ENTER button.
2
1
119
120
...
Click on the first or last page to see other FV-DB1E (serv.man2) service manuals if exist.