Read Sharp DK-CL8PH User Guide / Operation Manual online
15
2011 September 14
DK-CL8PH ENUK_A6_p01-p21.fm
DK-CL8PH
Radio / Adva
nce
d
Fea
tur
es
Note:
The batteries system protects the programmed stations should
there be a power failure or the AC/DC adaptor becomes
disconnected. If the backup batteries are drain off, the
programmed stations will be erased.
The batteries system protects the programmed stations should
there be a power failure or the AC/DC adaptor becomes
disconnected. If the backup batteries are drain off, the
programmed stations will be erased.
■ To recall a programmed station
Press CLOCK/MEM. button then press
or
button
repeatedly to select the desired programmed station.
Alarm operation
■ Alarm
The unit turns on and play desired source (iPod or TUNER) or
Buzzer sound for 1 hour alarm duration.
Before setting the alarm:
Buzzer sound for 1 hour alarm duration.
Before setting the alarm:
Setting the alarms
In this example, the setting is for ALARM 1. The same method is
used to set for ALARM 2.
In this example, the setting is for ALARM 1. The same method is
used to set for ALARM 2.
1 Check that the clock is set to the correct time.
(refer page 11)
If it is not set, you cannot use the alarm function.
2 For iPod or iPhone playback: Insert iPod or iPhone to the
unit. (refer page 13)
3 For TUNER: Set preset memory. (refer page 14)
1
In standby mode, press and hold the AL 1 button until
the alarm time blinking.
the alarm time blinking.
2
Press the (
or
) button to adjust the hour and
press the AL 1 button.
Press the (
or )
button once to advance the time by
1 hour. Hold it down to advance continuously. “AM” or “PM”
indicator will interchange after each 12 hour cyclic.
indicator will interchange after each 12 hour cyclic.
1
PM
Click on the first or last page to see other DK-CL8PH service manuals if exist.