Read Sharp DK-AP7P User Guide / Operation Manual online
E-6
2008 December 17
DK-AP7N_A6_08 EN.fm
ENGLISH
8
2
7
6
5
4
3
1
DK-AP7N(S)
DK-AP7N(W)
DK-AP7N(R)
Preparation f
or Use
■
Using with the batteries
Note:
Remove the batteries if the unit will not be used for a long period
of time to prevent battery leakage which may cause potential
damage.
of time to prevent battery leakage which may cause potential
damage.
Battery replacement:
When batteries are low, sound may become distorted and unit
may automatically turn off during high volume level. Reduce the
volume level or replace the batteries.
may automatically turn off during high volume level. Reduce the
volume level or replace the batteries.
Battery life:
Note:
Battery life may vary depending on the temperature, battery
types and usage conditions.
types and usage conditions.
Precautions for battery use:
●
Installing the batteries incorrectly may cause the unit to
malfunction.
malfunction.
●
Insert the batteries according to the direction indicated in the
battery compartment.
battery compartment.
●
Remove the batteries if the unit will not be used for a long
period of time. This will prevent potential damage due to
battery leakage.
period of time. This will prevent potential damage due to
battery leakage.
●
When using batteries, the brightness of all illumination light
(indicators) is reduced compared to using AC/DC adaptor.
(indicators) is reduced compared to using AC/DC adaptor.
●
Replace all old batteries with new ones at the same time.
●
Do not mix old and new batteries.
●
Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
exposed to excessive heat such as sunshine, fire or the like.
Caution:
Do not use rechargeable batteries (nickeI-cadmium battery,
etc.).
etc.).
Changing power source:
Turn off the unit before changing the power source. If the 6V DC
power supply is directly plugged in during power on, the unit may
automatically enter to stand-by mode. Press the ON/STAND-BY
button again to turn on the unit.
power supply is directly plugged in during power on, the unit may
automatically enter to stand-by mode. Press the ON/STAND-BY
button again to turn on the unit.
1
Open the battery cover.
Slide the cover in the direction of the arrow.
Slide the cover in the direction of the arrow.
2
Insert the batteries according to the direction indicated in
the battery compartment.
the battery compartment.
3
Close the cover.
Battery type
ALKALINE (AA) (1.5V)
Usage time
Approx. 8 hrs.
Output Front
48mW + 48mW
Output Subwoofer
80mW
Click on the first or last page to see other DK-AP7P service manuals if exist.