Read Sharp DK-A10H (serv.man3) Service Manual online
DK-A10H/DK-A10H(BK)
1 – 4
[3] Specifications
DK-A10H/DK-A10H(BK)
[2] Important Service Notes (for U.K. only)
Before returning the unit to the customer after completion of a repair or adjustment it is necessary for the following withstand voltage test to be
applied to ensure the unit is safe for the customer to use.
applied to ensure the unit is safe for the customer to use.
Setting of Withstanding Voltage Tester and set.
Set name
set value
Withstanding Voltage Tester
Test voltage
Test voltage
4,240 VPEAK
3,000 VRMS
3,000 VRMS
Set time
6 secs
Set current (Cutoff current)
4 mA
Unit
Judgment
OK: The “GOOD” lamp lights.
NG: The “NG” lamp lights and the buzzer sounds.
Judgment
OK: The “GOOD” lamp lights.
NG: The “NG” lamp lights and the buzzer sounds.
PROBE
AC
OUT
UNIT
SHORT-CIRCUIT
AC POWER
SUPPLY CORD
AC POWER
SUPPLY CORD
CONNECT THE PROBE
TO SHELL OF VIDEO
OUT SOCKET
TO SHELL OF VIDEO
OUT SOCKET
WITHSTANDING
VOLTAGE TESTER
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER TO THE OPERATION MANUAL.
General
*This power consumption value is obtained when the demonstration
mode is cancelled in the power stand-by mode.
mode is cancelled in the power stand-by mode.
Tuner
CD player
Power source
AC 220 - 240 V, 50 Hz
Power
consumption
consumption
Power on: 34 W
Power stand-by: 0.6 W (*)
Power stand-by: 0.6 W (*)
Output power
PMPO: 64 W
Front Speaker:
MPO: 10 W (5 W + 5 W) (DIN 45 324)
RMS: 4 W (2 W + 2 W) (DIN 45 324)
RMS: 4 W (2 W + 2 W) (DIN 45 500)
Front Speaker:
MPO: 10 W (5 W + 5 W) (DIN 45 324)
RMS: 4 W (2 W + 2 W) (DIN 45 324)
RMS: 4 W (2 W + 2 W) (DIN 45 500)
Subwoofer:
MPO: 12 W (6 W + 6 W) (DIN 45 324)
RMS: 10 W (5 W + 5 W) (DIN 45 324)
RMS: 6 W (3 W + 3 W) (DIN 45 500)
MPO: 12 W (6 W + 6 W) (DIN 45 324)
RMS: 10 W (5 W + 5 W) (DIN 45 324)
RMS: 6 W (3 W + 3 W) (DIN 45 500)
Speaker
1-way type light-up speaker system
Front Speakers: 6.5 cm (2-1/2") - 12 ohms - Full
Range
Subwoofer: 10 cm (4") - 8 ohms - Woofer
Front Speakers: 6.5 cm (2-1/2") - 12 ohms - Full
Range
Subwoofer: 10 cm (4") - 8 ohms - Woofer
Speaker
maximum
input power
maximum
input power
Front Speakers: 4W/ Channel
Subwoofer: 10W / Channel
Subwoofer: 10W / Channel
Speaker rated
input power
input power
Front Speakers: 2W / Channel
Subwoofer: 5W / Channel
Subwoofer: 5W / Channel
Output
terminals
terminals
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Video output: 1Vp-p
(recommended: 32 ohms)
Video output: 1Vp-p
Input
terminals
terminals
Auxiliary (audio signal):
500 mV/47 k ohms
500 mV/47 k ohms
Dimensions
Width: 500 mm (19-11/16")
Height: 150 mm (5-7/8")
Depth: 250 mm (9-7/8")
Height: 150 mm (5-7/8")
Depth: 250 mm (9-7/8")
Weight
5.3 kg (11.7 lbs.)
Frequency range
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
AM: 522 - 1,620 kHz
Type
Single disc player
Signal readout
Non-contact, 3-beam semiconductor laser
pickup
pickup
D/A converter
Multi bit D/A converter
Frequency
response
response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
1 – 2
Click on the first or last page to see other DK-A10H (serv.man3) service manuals if exist.