CD-XP200H (serv.man22) - Sharp Audio Service Manual (repair manual). Page 6

– 6 –

1

Top Cabinet

1. Screw ...................... (A1) x4

6-1

2

Side Panel

1. Screw ...................... (B1) x8

6-1

(Left/Right)

3

CD Tray Cover/

1. Turn on the power supply, ..

6-2

CD Player Unit

    open the disc tray, take out
    the CD tray cover, and close.
    (Note 1)
2. Screw ...................... (C1) x1
3. Hook ........................ (C2) x3
4. Hook ........................ (C3) x2
5. Socket ..................... (C4) x2

4

Rear Panel with

1. Screw .................... (D1) x10

6-2

Fan Motor

2. Socket ..................... (D2) x1

5

Main PWB

1. Screw ...................... (E1) x4 6-2, 7-1
2. Socket ..................... (E2) x3

7-1

3. Flat Cable ............... (E3) x1
4. Flat Wire .................. (E4) x1

6

Front Panel

1. Screw ....................... (F1) x2

7-1

2. Hook ......................... (F2) x2
3. Socket ...................... (F3) x1

7

Display PWB

1. Screw .................... (G1) x12

7-2

2. Flat Cable ............... (G2) x1

8

Tape Mechanism 1. Open the cassette holder.

7-2

2. Screw...................... (H1) x5

9

Headphones PWB 1. Screw ....................... (J1) x1

7-2

10

Turntable

1. Hook ........................ (K1) x2

7-3

2. Cover ...................... (K2) x1

11

Loading Tray

1. Turn fully the lock  lever in the

6-3

arrow direction.

2. Push the loading tray backward

7-4

to engage the claw with the
groove and remove it in the
direction of the arrow. .. (L1) x6

12

CD Servo PWB

1. Screw ...................... (M1) x2

7-5

(Note 2)

2. Hook ........................ (M2) x1
3. Socket ..................... (M3) x4

13

CD Mechanism

1. Hook ........................ (N1) x2

7-6

2. Hook ........................ (N2) x2

Caution on Disassembly
Follow the below-mentioned notes when disassembling
the unit and reassembling it, to keep it safe and ensure
excellent performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall

outlet before starting to disassemble the unit.

3. Take off nylon bands or wire holders where they need to

be removed when disassembling the unit. After servicing
the unit, be sure to rearrange the leads where they were
before disassembling.

4. Take sufficient care on static electricity of integrated

circuits and other circuits when servicing.

Note 1: How to open the changer manually. (Fig. 6-3)
1.  In this state, turn fully the lock lever in the arrow direction through

the hole on the loading tray bottom.

2. After that, push forward the loading tray.

Note 2:
1. After removing the connector for the optical pickup from the

connector, wrap the conductive aluminium foil around the front end
of the connector so as to protect the optical pickup from electro-
static damage.

Note 3:
1. Be careful not to break the claw of the CD mechanism.
2. When fining back the cam gear assembly, let it lock by front

movement.

(B1)x2
ø3x10mm

(A1)x2
ø3x12mm

(A1)x2
ø3x12mm

(B1)x2
ø3x10mm

(B1)x4
ø3x10mm

Rear
Panel

Side Panel
(Right)

Side Panel
(Left)

Top Cabinet

Front
Panel

(C3)x1

CD Player
Unit

CD Tray Cover

(C2)x3

1

1

2

2

(E1)x1
ø3x10mm

(C1)x1
ø3x10mm

(E1)x1
ø3x10mm

(D1)x1
ø3x10mm

Lug Wire

Main PWB

Rear
Panel

Pull

(C3)x1

(C4)x2

CD Servo
PWB

Main
PWB

(D2)x1

(D1)x9
ø3x10mm

Lock Lever

CD Player Unit
(Bottom View)