Read Sharp CD-XP110 User Guide / Operation Manual online
02/5/31
CD-XP110H(H)E1.fm
E-7
ENGLISH
CD-XP110H
Pr
ep
ar
at
ion f
o
r Use
- S
yst
em
co
n
n
ect
io
n
s
-
System connections
!
Removing the transport screw
Before turning the power on, be sure to remove the transport
screw on the back of the unit using a flat head screwdriver or a
coin.
Note:
This screw is required when transporting the unit again. Please
keep it (see page 24).
screw on the back of the unit using a flat head screwdriver or a
coin.
Note:
This screw is required when transporting the unit again. Please
keep it (see page 24).
!
FM/AM loop aerial connection
Connect the FM/AM loop aerial to the ANTENNA socket.
Position the FM aerial wire and rotate the AM loop aerial for opti-
mum reception. Place the AM loop aerial on a shelf, or attach it to a
stand or a wall.
mum reception. Place the AM loop aerial on a shelf, or attach it to a
stand or a wall.
Notes:
"
Placing the aerial on the unit or near the AC power lead may
cause noise pickup. Place the aerial away from the unit for better
reception.
cause noise pickup. Place the aerial away from the unit for better
reception.
"
Do not connect the attached FM aerial to an external FM aerial.
Otherwise, trouble may occur.
Otherwise, trouble may occur.
Installing the AM loop aerial:
AM loop aerial
FM aerial
Left speaker
Right speaker
Transport
screw
screw
Right speaker
Left speaker
Plain
White line
Wall socket
(AC 230 V, 50 Hz)
(AC 230 V, 50 Hz)
< Assembling >
< Attaching to the wall >
Wall
Screws
(not supplied)
(not supplied)
Click on the first or last page to see other CD-XP110 service manuals if exist.