CD-SW300H - Sharp Audio User Guide / Operation Manual. Page 12

13/2/06

CD-SW300HE_EN.fm

CD-SW300H

TINSZA165AWZZ

There is no distinction between the right and left speakers.

Note:
The speaker grilles are not removable.

After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket. If you plug in the
unit first, the unit will enter the demonstration mode.

The unit will start the tape initialisation when plugged in to the wall
socket. During this process, initialising sound will be heard and
the unit cannot be turned on. Wait until the process is finished.
Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.

 

Use an external FM aerial if you require better reception. Consult
your dealer.

Note:
When an external FM aerial is used, disconnect the supplied FM
aerial wire.

Cooling fan:
The main unit is built with a cooling fan at the rear of the unit for 
improved cooling. Please do not cover the opening of the fan with 
any obstacles, as this will block proper ventilation.

Table

Floor

Left speaker Main unit Right speaker

Subwoofer

The first time the unit is plugged in, the unit 
will enter the demonstration mode. You will 
see words scroll and the subwoofer and 
front speaker will light up in flashing mode.

To cancel the demonstration mode:
When the unit is in the power 
stand-by mode (demonstration 
mode), press the X-BASS (SUR-
ROUND)/DEMO button. The unit 
will enter the low power consump-
tion mode and the subwoofer and 
front speaker light up will be off.
 
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS 
(SURROUND)/DEMO button again.
 
Note:
When the power is on, the X-BASS (SURROUND)/DEMO button can 
be used to select the extra bass mode.

External
FM aerial

75 ohms
coaxial cable