Read Sharp CD-RW5000 User Guide / Operation Manual online
23
Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)
Listening to the Radio
■
Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button to select the desired frequency
band (FM or AM).
band (FM or AM).
3
Press the TUNING (
X
X
X
X
X
or
W
W
W
W
W
) button to tune into the desired sta-
tion.
Manual tuning:
Press the TUNING (
X
or
W
) button as many times as required to tune into the
desired station.
Auto tuning:
When the TUNING (
X
or
W
) button is pressed for more than 0.5 seconds,
scanning will start automatically and the tuner will stop at the first receivable
broadcast station.
broadcast station.
Notes:
●
When radio interference occurs, auto scan tuning may stop automatically at
that point.
that point.
●
Auto scan tuning will skip weak signal stations.
●
To stop the auto tuning, press the TUNING (
X
or
W
) button again.
●
When an RDS (Radio Data System) station is tuned in, the frequency will be
displayed first, and then the RDS indicator will light. Finally, the station name
will appear.
displayed first, and then the RDS indicator will light. Finally, the station name
will appear.
●
Full auto tuning can be achieved for RDS stations “ASPM”, see page 27.
4
To receive an FM stereo transmission, press the ST-MODE but-
ton on the remote control. The “ST” indicator lights up.
ton on the remote control. The “ST” indicator lights up.
●
“
j
” will appear when an FM broadcast is in stereo.
●
If the FM reception is weak, press the ST-MODE button. The “ST” indicator
goes out. The reception changes to monaural, and the sound becomes clearer.
goes out. The reception changes to monaural, and the sound becomes clearer.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Radio
Click on the first or last page to see other CD-RW5000 service manuals if exist.