Read Sharp CD-RW5000 User Guide / Operation Manual online
17
Basic Operation
Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)
To confirm the time display in the stand-by mode:
Press the DISPLAY button on the remote control. The time display will appear for
about 3 seconds.
about 3 seconds.
Note:
“CLOCK” will appear or time will flash at the push of the DISPLAY button when the AC
power supply is restored after a power failure or after unplugging the unit.
Reset the clock as follows.
“CLOCK” will appear or time will flash at the push of the DISPLAY button when the AC
power supply is restored after a power failure or after unplugging the unit.
Reset the clock as follows.
To reset the clock:
Perform “Setting the Clock” from the beginning.
At this time, step 5 (for selecting the 24-hour or 12-hour display) will be skipped.
At this time, step 5 (for selecting the 24-hour or 12-hour display) will be skipped.
To change the 24-hour or 12-hour display:
1.
Clear all the programmed contents.
[Refer to “If trouble occurs (reset)” on page 53 for details.]
2.
2.
Perform “Setting the Clock” from the beginning.
Setting the Clock
In this example, the clock is set for the 24-hour (0:00) display.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the MENU button.
3
Turn the jog dial to select “CLOCK” and within 10 seconds, press
the ENTER button.
the ENTER button.
4
Within 2 minutes, press the ENTER button again.
5
Turn the jog dial to select the 24-hour or 12-hour display and
within 2 minutes, press the ENTER button.
within 2 minutes, press the ENTER button.
6
Turn the jog dial to adjust the hour and within 2 minutes, press
the ENTER button.
the ENTER button.
●
When the 12-hour display is selected, “AM” will change automatically to “PM”.
7
Turn the jog dial to adjust the minutes and within 2 minutes, press
the ENTER button.
the ENTER button.
●
The hour will not advance even if minutes advance from “59” to “00”.
●
The clock starts from “0” second. (Seconds are not displayed.)
The time display will disappear after a few seconds.
The time display will disappear after a few seconds.
“0:00”
→
The 24-hour display will appear. (0:00 - 23:59)
“AM 12:00”
→
The 12-hour display will appear. (AM 12:00 - PM 11:59)
“AM 0:00”
→
The 12-hour display will appear. (AM 0:00 - PM 11:59)
**RW5000H_P15_17(Basic)
00.7.29, 8:14 AM
17
Click on the first or last page to see other CD-RW5000 service manuals if exist.