CD-MPX860H - Sharp Audio User Guide / Operation Manual. Page 10

Read Sharp CD-MPX860H User Guide / Operation Manual online

 
CD-MPX860HE .fm
 
10
 
CD-MPX860H
 
Preparation for Use
 
System connections (continued)
  
Aerial connection
 
Note:
 
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
 
Installing the AM loop aerial:
  
Speaker connection
 
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
 
Caution:  
Supplied FM aerial:
 
Connect the FM aerial wire to the FM 
75 OHMS socket and position the FM 
aerial wire in the direction where the 
strongest signal can be received.
 
Supplied AM loop aerial:
 
Connect the AM loop aerial to the AM 
and GND terminals. Position the AM 
loop aerial for optimum reception. 
Place the AM loop aerial on a shelf, 
etc., or attach it to a stand or a wall with 
screws (not supplied).
< Assembling >
< Attaching to the wall >
 
Wall   Screws (not supplied)
ANTENNA
FM
75 OHMS
AM
GND
AM loop 
aerial
FM 
aerial
  
Use speakers with an impedance of 6 ohms
or more, as lower impedance speakers can
damage the unit.
  
Do not mistake the right and the left 
channels. The right speaker is the one on the 
right side when you face the unit.
  
Do not let the bare speaker wires touch 
each other.
  
Do not stand or sit on the speakers. You may 
be injured.
  
Do not allow any objects to fall into or to be 
placed in the bass reflex duct.
 
Incorrect
Red
Black
Page of 48
Display

Click on the first or last page to see other CD-MPX860H service manuals if exist.