Read Sharp CD-MPX860H User Guide / Operation Manual online
CD-MPX860HE .fm
46
CD-MPX860H
References
Maintenance
Cleaning the tape-handling parts
Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
When cleaning the heads, pinch rollers, etc., unplug the unit which
contains high voltages.
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
When cleaning the heads, pinch rollers, etc., unplug the unit which
contains high voltages.
After long use, the deck's heads and capstans may become
magnetised, causing poor sound. Demagnetise these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser's instructions
carefully before use.
magnetised, causing poor sound. Demagnetise these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser's instructions
carefully before use.
Cleaning the CD pickup lens
Poor performance during CD playback (skipping or jumping) can be
caused by a dirty or contaminated CD laser pick up lens. If this
happens then the use of a commercially available CD lens cleaning
discs may restore normal operation. Contact your supplier or local
CD software dealer to obtain CD lens cleaning discs. Ensure all
included instructions/documentation are carefully followed.
caused by a dirty or contaminated CD laser pick up lens. If this
happens then the use of a commercially available CD lens cleaning
discs may restore normal operation. Contact your supplier or local
CD software dealer to obtain CD lens cleaning discs. Ensure all
included instructions/documentation are carefully followed.
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
solution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause malfunc-
tions.
may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause malfunc-
tions.
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
General
* This power consumption value is obtained when the demonstration
mode is cancelled in the power stand-by mode. Refer to page 11 to
cancel the demonstration mode.
cancel the demonstration mode.
Amplifier
Playback head
Erase head
Capstans
Recording/Playback head
Pinch rollers
TAPE 1
TAPE 2
A
C
B
C
D
E
B
Power source
AC 230 V, 50 Hz
Power
consumption
consumption
Power on: 105 W
Power stand-by: 0.6 W (*)
Power stand-by: 0.6 W (*)
Dimensions
Width: 260 mm (10 - 1/4")
Height: 330 mm (13")
Depth: 323 mm (12 - 7/8")
Height: 330 mm (13")
Depth: 323 mm (12 - 7/8")
Weight
7.5 kg (16.5 lbs.)
Output power
RMS: 240 W (120 W + 120 W) (10% T.H.D)
RMS: 160 W (80 W + 80 W) (0.9% T.H.D)
RMS: 160 W (80 W + 80 W) (0.9% T.H.D)
Output terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
(recommended: 32 ohms)
Video output: 1Vp-p
Input terminals
Game/ Auxiliary (audio signal):
500 mV/ 47 k ohms
500 mV/ 47 k ohms
Game/Video: 1Vp-p
Click on the first or last page to see other CD-MPX860H service manuals if exist.