CD-MPX860H - Sharp Audio User Guide / Operation Manual. Page 17

CD-MPX860HE .fm

CD-MPX860H

Playback will begin from track 1 on disc 1. After that disc finishes
playing, the next disc will automatically play.
After the last track on the fifth disc is played, the unit will stop
automatically.
When there is no disc in one of the disc trays (1 - 5), the empty
tray will be skipped to the next tray with a disc.

To exchange other discs whilst playing a disc:
Press one of the   1 -   5 buttons for the stopped disc and within 5
seconds, press the   button and exchange discs.

To remove the discs:
In the stop mode, press the   1 -   5 buttons and within 5 seconds,
press the   button.

Do not place two discs in a same tray.
Do not play discs of special shapes (heart, octagon, etc.) as it
may cause malfunctions.
Do not push the disc tray whilst it is moving.
If the power fails whilst the tray is open, wait until the power is
restored.
If the disc tray is stopped with force, “ER-CD20” will appear on the
display for 3 seconds and the unit will not function. If this occurs,
press the ON/STAND-BY button to enter the power stand-by
mode and then turn the power on again.
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play.

Press in the stop 
mode.

Press in the playback 
mode.

Press in the playback 
mode. Press the   /   
button to resume play-
back from the paused 
point.

Press in the playback 
or stop mode.

If you press the button 
in the stop mode, 
press the   /   button 
to start the desired 
track.

Press and hold down 
in the playback mode.

Release the button to 
resume playback.