Read Sharp CD-MPX100E User Guide / Operation Manual online
10/3/05
MPX100EE_1.fm
10
TINSEA093AWZZ
CD-MPX100E
Preparation
for U
s
e
System connections (continued)
n FM/AM loop aerial connection
Connect the FM/AM loop aerial to the ANTENNA socket.
Position the FM aerial wire and rotate the AM loop aerial for optimum
reception. Place the AM loop aerial on a shelf, or attach it to a stand
or a wall.
reception. Place the AM loop aerial on a shelf, or attach it to a stand
or a wall.
Notes:
l Placing the aerial on the unit or near the AC power lead may
l Placing the aerial on the unit or near the AC power lead may
cause noise pickup. Place the aerial away from the unit for better
reception.
reception.
l Do not connect the attached FM aerial to an external FM aerial.
Otherwise trouble may occur.
Installing the AM loop aerial:
<Assembling>
<Assembling>
<Attaching to the wall>
n Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
the plus (+) terminal.
Caution:
n Placing the speaker system
There is no distinction between the right and the left speakers.
Note:
The speaker grilles are not removable.
The speaker grilles are not removable.
Wall
Screws
(not supplied)
(not supplied)
l Use speakers with an impedance of 6 ohms
or more, as lower impedance speakers can
damage the unit.
damage the unit.
l Do not mistake the right and the left chan-
nels. The right speaker is the one on the right
side when you face the unit.
side when you face the unit.
l Do not let the bare speaker wires touch
each other.
l Do not allow any objects to fall into or to be
placed in the reflex ducts.
Incorrect
l Do not stand or sit on the speakers. You may be injured.
Left speaker
Right speaker
MINI COMPONENT SYSTEM CD-MPX100W
DISPLAY
Click on the first or last page to see other CD-MPX100E service manuals if exist.