Read Sharp CD-MPX100E User Guide / Operation Manual online
10/3/05
MPX100EE_1.fm
16
TINSEA093AWZZ
CD-MPX100E
CD o
r MP3/WM
A disc Playback
Listening to a CD or MP3/WMA disc (continued)
To stop playback:
Press the button.
Press the button.
To remove the disc:
Whilst in the stop mode, press the OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the DISC
SKIP button to rotate the disc tray and remove the remaining disc.
Whilst in the stop mode, press the OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the DISC
SKIP button to rotate the disc tray and remove the remaining disc.
Caution:
l Do not place two disc in one disc tray.
l Do not play discs of special shapes (heart, octagon, etc.). It may
l Do not place two disc in one disc tray.
l Do not play discs of special shapes (heart, octagon, etc.). It may
cause malfunctions.
l Do not push the disc tray whilst it is moving.
l Do not turn the disc tray by hand. This may cause malfunctions.
l If the power fails whilst the tray is open, wait until the power is re-
l Do not turn the disc tray by hand. This may cause malfunctions.
l If the power fails whilst the tray is open, wait until the power is re-
stored.
l If the disc tray is stopped forcibly, "ER-CD20" will appear on the
display for 3 seconds and the unit will not function. If this occurs,
press the ON/STAND-BY button to enter the power stand-by
mode and then turn the power on again.
press the ON/STAND-BY button to enter the power stand-by
mode and then turn the power on again.
l If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
l If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play back.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the OPEN/CLOSE button to open the disc tray.
4
Place the disc on the disc tray, label side up.
When loading a third disc, press the DISC SKIP button to
turn the disc tray, then place the disc in the open position.
l Disc can be placed on any open position on the disc tray.
l Be sure to place 8 cm (3") disc in the middle of the disc
turn the disc tray, then place the disc in the open position.
l Disc can be placed on any open position on the disc tray.
l Be sure to place 8 cm (3") disc in the middle of the disc
positions.
5
Press the OPEN/CLOSE button to close the disc tray.
l Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
to 90 seconds).
6
To select the disc you want to listen to first, press one of
the 1 - 3 buttons on the remote control.
the 1 - 3 buttons on the remote control.
12 cm (5")
8 cm (3")
[CD]
Total number of
tracks on the disc
tracks on the disc
Total playing
time of the disc
time of the disc
Total number
of track
of track
MP3 indicator
[MP3/WMA]
CD indicator
WMA indicator
7
Press the / button to start playback.
l Playback will begin from track 1 on the disc you have select-
ed to play. After that disc finishes playing, the next disc will
automatically start playback.
automatically start playback.
l When the last track on the third disc has finished playing, the
CD player will automatically stop.
l When there is no disc in one of the disc 1 - 3 positions, that
position will be skipped and the next disc will be played.
Click on the first or last page to see other CD-MPX100E service manuals if exist.