Read Sharp CD-MPX100E (serv.man3) Service Manual online
CD-MPX100E
3 – 4
[2] Removing and reinstalling the main parts
1. TAPE MECHANISM SECTION
Perform steps 1 to 6 and 8 of the disassembly method to remove the
tape mechanism.
tape mechanism.
1.1. How to remove the record/playback and erase heads.
(TAPE 2) (See Fig. 1)
(TAPE 2) (See Fig. 1)
1. When you remove the screws (A1) x 2 pcs., the recording/playback
head and three-dimensional head of the erasing head can be
removed.
removed.
1.2. How to remove the playback head. (TAPE 1)
(See Fig. 2)
(See Fig. 2)
1. When you remove the screws (B1) x 2 pcs., the playback head can
be removed.
1.3. How to remove the pinch roller. (TAPE 1/2) (See Fig. 3)
1. Carefully bend the pinch roller pawl in the direction of the arrow
<A>, and remove the pinch roller (C1) x 1 pc., in the direction of the
arrow <B>.
arrow <B>.
NOTE: When installing the pinch roller, pay attention to the spring
mounting position.
1.4. How to remove the belt. (TAPE 2) (See Fig. 4)
1. Remove the main belt (D1) x 1 pc., from the motor side.
2. Remove the FF/REW belt (D2) x 1 pc.
1.5. How to remove the belt. (TAPE 1) (See Fig. 4)
1. Remove the main belt (E1) x 1 pc., from the motor side.
2. Remove the FF/REW belt (E2) x 1 pc.
1.6. How to remove the motor. (See Fig. 5)
1. Remove the screws (F1) x 2 pcs., to remove the motor.
Figure 1
Figure 2
(A1)x2
φ2x9mm
φ2x9mm
TAPE 2
Record/Playback
Head
Head
Erase Head
Clutch Ass'y
(B1)x2
φ
2x9mm
TAPE 1
Playback
Head
Head
Clutch Ass'y
Figure 3
Figure 4
Figure 5
Pinch Roller
(C1)x1
(C1)x1
<A>
<B>
Pinch
Roller
Pawl
Roller
Pawl
Pull
TAPE 2
TAPE 1
Main Belt
(E1)x1
Main Belt
(E1)x1
TAPE 2
Main Belt
(D1)x1
Main Belt
(D1)x1
TAPE 1
Main Belt
(D1)x1
(D1)x1
Main Belt
(E1)x1
(E1)x1
FF/REW
Belt
(D2)x1
Belt
(D2)x1
FF/REW
Belt
(E2)x1
Belt
(E2)x1
Tape
Motor
Tape
Motor
(F1)x2
φ
2.6x5mm
Tape
Motor
Motor
Clutch Ass'y
Click on the first or last page to see other CD-MPX100E (serv.man3) service manuals if exist.