CD-MPS660H (serv.man11) - Sharp Audio User Guide / Operation Manual. Page 47

03/12/19

CD-MPS660H(H)E4.fm

8

CD-MPS660H

TINSZA035AWZZ

"

!

Before plugging in or unplugging the headphones, reduce the
volume.

!

Be sure your headphones have a 3.5 mm (1/8") diameter plug
and are between 16 ohms and 50 ohms impedance. The recom-
mended impedance is 32 ohms.

!

Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME control.

Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.

"

 

"

!

The clock is not set to the 
correct time.

!

Did a power failure occur? Reset 
the clock. (Refer to page 12.)

!

When a button is pressed, 
the unit does not respond.

!

Set the unit to the power stand-
by mode and then turn it back on.

!

If the unit still malfunctions, reset 
it. (Refer to page 42.)

!

No sound is heard.

!

Is the volume level set to "0"?

!

Are the headphones connected?

!

Are the speaker wires discon-
nected?

!

Playback does not start.

!

Is the disc loaded upside down?

!

Playback stops in the mid-
dle or is not performed 
properly.

!

Does the disc satisfy the stan-
dards?

!

Is the disc distorted or 
scratched?

!

Playback sounds are 
skipped, or stopped in the 
middle of a track.

!

Is the unit located near excessive 
vibrations?

!

Is the disc very dirty?

!

Has condensation formed inside 
the unit?