Read Sharp CD-MPS660H (serv.man11) User Guide / Operation Manual online
03/12/19
CD-MPS660H(H)E3.fm
E-28
ENGLISH
8
CD-MPS660H
TINSZA035AWZZ
Tape
Recordi
n
g
Sequential recording from several discs:
To perform programmed recording:
To stop recording:
Press the button.
The disc and tape will stop.
Press the button.
The disc and tape will stop.
!
Recording from the radio
To interrupt recording:
Press the
Press the
button.
To resume recording, press the / button.
To stop recording:
Press the button.
Press the button.
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
!
Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
To stop dubbing:
Press the button.
TAPE 1 and TAPE 2 will simultaneously stop.
Press the button.
TAPE 1 and TAPE 2 will simultaneously stop.
!
Erasing recorded tapes
Note:
Make sure that the TAPE 1 is not in use.
Make sure that the TAPE 1 is not in use.
1 Perform steps 1 - 5 in "Recording from a CD or MP3 disc" on page
27.
2 Within 5 seconds, press the / button.
1 Programme discs and tracks (see pages 18, 22).
2 Press the
2 Press the
button.
3 Press the / button.
1
Tune in to the desired station (see page 23).
2
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
performed.
3
Press the
button.
Recording will be paused.
4
Press the / button to start recording.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette
into the TAPE 1 cassette com-
partment. Insert a blank tape
into the TAPE 2 cassette com-
partment.
into the TAPE 1 cassette com-
partment. Insert a blank tape
into the TAPE 2 cassette com-
partment.
It is recommended that the recording tape is the same length as
the master tape.
the master tape.
3
Press the TAPE (1 2) button until "TAPE 1" appears on
the display.
the display.
4
Press the
button.
Recording will be paused.
5
Press the / button to start dubbing.
1
Load the tape to be erased into the TAPE 2 cassette compart-
ment with the side to be erased facing toward you.
ment with the side to be erased facing toward you.
2
Press the TAPE (1 2) button until "TAPE 2" appears on the dis-
play.
play.
3
Press the
button.
4
Press the / button to start erasing.
TAPE 1
TAPE 2
23
SHARP
T
INSZA0
3
5
A
W
Z
Z
Z
(H
)
)
Click on the first or last page to see other CD-MPS660H (serv.man11) service manuals if exist.