Read Sharp CD-MPS660H (serv.man10) User Guide / Operation Manual online
03/12/19
CD-MPS660H(H)E4.fm
E-43
ENGLISH
CD-MPS660H
TINSZA035AWZZ
Refe
rences
Maintenance
!
Cleaning the tape-handling parts
"
Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
"
When cleaning the heads, pinch rollers, etc., unplug the unit
which contains high voltages.
which contains high voltages.
"
After long use, the deck's heads and capstans may become mag-
netised, causing poor sound. Demagnetise these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser's instructions
carefully before use.
netised, causing poor sound. Demagnetise these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser's instructions
carefully before use.
!
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
solution, then with a dry cloth.
Caution:
"
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
may damage the cabinet finish.
"
Do not apply oil to the inside of the unit. It may cause malfunc-
tions.
tions.
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
!
General
!
Amplifier
Playback head
Erase head
Capstan
Recording/Playback head
Pinch roller
TAPE 1
TAPE 2
A
C
B
C
D
E
B
Power source
AC 230 V, 50 Hz
Power
consumption
consumption
Power on: 110 W
Power stand-by: 0.6 W (*)
Dimensions
Width: 260 mm (10-1/4")
Height: 330 mm (13")
Depth: 326 mm (12-7/8")
Height: 330 mm (13")
Depth: 326 mm (12-7/8")
Weight
7.8 kg (17.2 lbs.)
( * )This power consumption value is obtained when the demonstra-
tion mode is cancelled in the power stand-by mode. Refer to
page 9 to cancel the demonstration mode.
page 9 to cancel the demonstration mode.
Output power
PMPO: 880 W
MPO: 440 W (220 W + 220 W) (DIN 45 324)
RMS: 240 W (120 W + 120 W) (DIN 45 324)
RMS: 160 W (80 W + 80 W) (DIN 45 500)
Output terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
(recommended: 32 ohms)
Video output: 1Vp-p
Input terminals
Game/ Auxiliary (audio signal):
500 mV/ 47 k ohms
500 mV/ 47 k ohms
Game/Video: 1Vp-p
23
SHARP
T
INSZA0
3
5
A
W
Z
Z
Z
(H
)
)
Click on the first or last page to see other CD-MPS660H (serv.man10) service manuals if exist.