Read Sharp CD-MD3000 (serv.man2) User Guide / Operation Manual online
4
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
General Information
Precautions
■
General
●
Please ensure that the equipment is positioned in a well ventilated area
and that there is at least 10 cm (4") of free space along the sides and back.
There must also be a minimum of 20 cm (8") of free space on the top of the
unit.
and that there is at least 10 cm (4") of free space along the sides and back.
There must also be a minimum of 20 cm (8") of free space on the top of the
unit.
10 cm (4")
10 cm (4")
20 cm (8")
10 cm (4")
●
Use the unit on a firm, level surface free
from vibration.
from vibration.
●
Keep the unit away from direct sunlight,
strong magnetic fields, excessive dust,
humidity and electronic/electrical equip-
ment (home computers, facsimiles, etc.)
which generates electrical noise.
strong magnetic fields, excessive dust,
humidity and electronic/electrical equip-
ment (home computers, facsimiles, etc.)
which generates electrical noise.
●
Do not place anything on top of the unit.
●
Do not expose the unit to moisture, to temperatures higher than 60
°
C
(140
°
F) or to extreme low temperatures.
●
If your system does not work properly, disconnect the AC power lead
from the wall socket. Plug the AC power lead back in, and then turn on
your system.
from the wall socket. Plug the AC power lead back in, and then turn on
your system.
●
In case of an electrical storm, unplug the
unit for safety.
unit for safety.
●
Hold the AC power plug by the head when re-
moving it from the wall socket, as pulling the
lead can damage internal wires.
moving it from the wall socket, as pulling the
lead can damage internal wires.
●
Do not remove the outer cover, as this may
result in electric shock. Refer internal ser-
vice to your local SHARP service facility.
result in electric shock. Refer internal ser-
vice to your local SHARP service facility.
●
The ventilation should not be impeded by cov-
ering the ventilation openings with items, such
as newspapers, tablecloths, curtains, etc.
ering the ventilation openings with items, such
as newspapers, tablecloths, curtains, etc.
●
No naked flame sources, such as lighted candles, should be placed on the
apparatus.
apparatus.
●
Attention should be drawn to the environmental aspects of battery disposal.
●
The apparatus is designed for use in moderate climate.
●
This unit should only be used within the range of 5
°
C - 35
°
C (41
°
F - 95
°
F).
Warning:
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is specified is
dangerous and may result in a fire or other type of accident causing damage.
SHARP will not be held responsible for any damage resulting from use of this
unit with a voltage other than that which is specified.
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is specified is
dangerous and may result in a fire or other type of accident causing damage.
SHARP will not be held responsible for any damage resulting from use of this
unit with a voltage other than that which is specified.
■
Volume control
The sound level at a given volume setting depends on speaker efficiency,
location, and various other factors.
It is advisable to avoid exposure to high volume levels, which occur whilst
turning the unit on with the volume control setting up high, or whilst continu-
ally listening at high volumes.
location, and various other factors.
It is advisable to avoid exposure to high volume levels, which occur whilst
turning the unit on with the volume control setting up high, or whilst continu-
ally listening at high volumes.
Click on the first or last page to see other CD-MD3000 (serv.man2) service manuals if exist.