CD-MD3000 (serv.man2) - Sharp Audio User Guide / Operation Manual. Page 13

Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)

■

Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire
in the direction where the strongest signal can be received.

Connect the AM loop aerial to the AM LOOP socket. Position the AM loop aerial for
optimum reception. Place the AM loop aerial on a shelf, etc., or attach it to a stand or a
wall with screws (not supplied).

Note:
Placing the aerial on the stereo system or near the AC power lead may cause noise
pickup.
Place the aerial away from the stereo system for better reception.

Wall

Screws

Use an external FM aerial if you require better reception.
Consult your dealer.

External FM aerial

■

Connect the blue wire to the (+) and the black one to the (–).

Connect the red wire to the (+) and the black one to the (–).

●

●

Never mistake the MAIN and the SUBWOOFER terminals.
The stereo system or the speakers may be damaged .

●

Only the included speakers should be used with this product.
Do not use other speakers with this unit or use the supplied speakers with other
units.

●

Do not mistake the right and the left channels.
The right speaker is the one on the right side when you face the unit.

●

Do not let the bare speaker wires touch each other.

,,

,,

●

Do not stand or sit on the speakers. You may be injured.

■

After checking all the connections have been made correctly, plug the unit into the
mains.
If you plug the unit first, the unit will enter the demonstration mode (see page 15).

Note:
Unplug the unit if it will not be used for a prolonged period of time.