Read Sharp CD-MD3000 (serv.man10) Service Manual online
– 15 –
CD-MD3000H/CD-MD3000W
1
Press the T
APE button.
2
Open the cassette door by pushing the area marked “PUSH EJECT
”.
PUSH EJECT
3
Load the cassette into the compartment with side
A
facing you.
PUSH EJECT
4
Press the REV
. MODE button on the remote control to choose one side or
both sides.
5
Press the
button to listen to side
A, or the
button for side B.
Listening to a Cassette T
ape
...
T
o
listen to both sides.
...
For endless repeat play of both sides.
...
T
o
listen to one side.
■
If trouble occurs (reset)
When this product is subjected to strong external interfer-
ence (mechanical shock, excessive static electricity
, ab-
normal supply voltage due to lightning, etc.) or if it is oper-
ated incorrectly
, it may malfunction.
If such a problem occurs, do the following:
1.
Press the ON/ST
AND-BY
button to enter the power
stand-by mode.
2.
Whilst pressing down the VOLUME
button, press
the ON/ST
AND-BY
button until “ALL
CLEAR” appears.
■
Maintenance
●
Dirty heads, capstans or pinch rollers can cause poor
sound and tape jams. Clean these parts with a cotton
swab moistened with commercial head/pinch roller
cleaner or isopropyl alcohol.
●
When cleaning the heads, pinch rollers, etc., unplug
the unit which contains high voltages.
●
After long use, the deck’s heads and capstans may be-
come magnetised, causing poor sound.
Demagnetise
these parts once every 30 hours of playing/recording
time by using a commercial tape head demagnetiser
.
Read the demagnetiser
’s
instructions carefully before
use.
●
Clean the dust or stain on the CD pickup lens using a
commercial cleaning disc (brush type).
1
Press the TUNER (BAND) button repeatedly to select the desired frequency
band (FM or
AM).
2
Press the TUNING (
or
) button to tune into the desired station.
●
When the
TUNING (
or
) button is pressed for more than 0.5 seconds, scanning will
start automatically and the tuner will stop at the first receivable broadcast station.
3
T
o
receive an FM stereo transmission, press the ST
-MODE button on the
remote control. The “ST” indicator lights up.
●
“
” will appear when an FM broadcast is in stereo.
A
B
C
D
C
D
Cleaning disc
A
Erase head
B
Recording/Playback head
C
Capstan
D
Pinch roller
Listening to the Radio
Click on the first or last page to see other CD-MD3000 (serv.man10) service manuals if exist.