Read Sharp CD-ES222E User Guide / Operation Manual online
25
CD-ES222E
03/10/29
CD-ES222E(UK).fm
TINSEA002SJZZ
Adv
anced F
eatures
Enhancing your system
The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
able lead as shown below.
Listening to the playback sounds from VCR,
DVD, etc.
DVD, etc.
Note:
To prevent noise interference, place the unit away from the televi-
sion.
To prevent noise interference, place the unit away from the televi-
sion.
To record on a tape
Headphones
z
Before plugging in or unplugging the headphones, reduce the vol-
ume.
ume.
z
Be sure your headphones have a 3.5 mm (1/8") diameter plug and
are between 16 ohms and 50 ohms impedance. The recommend-
ed impedance is 32 ohms.
are between 16 ohms and 50 ohms impedance. The recommend-
ed impedance is 32 ohms.
z
Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME buttons.
cally. Adjust the volume using the VOLUME buttons.
VCR, DVD, etc.
To the line
output sockets
output sockets
Red
RCA lead
(not supplied)
(not supplied)
White
Red White
1
Use a connection lead to connect the VCR, DVD, etc. to the
VIDEO/AUX IN sockets.
VIDEO/AUX IN sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
unit and the video output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the VIDEO/AUX button.
4
Play the connected equipment.
1
Insert a cassette in the TAPE 2 cassette compartment.
2
Press the VIDEO/AUX button.
3
Press the REC PAUSE (TAPE-2
) button.
4
Press the / button.
5
Play the VCR, DVD, etc.
8
Click on the first or last page to see other CD-ES222E service manuals if exist.