CD-E700H - Sharp Audio User Guide / Operation Manual. Page 36

02/12/6

CD-E700H(H)E3.fm

CD-E700H

Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.

!

 

!

!

 

!

"

The clock is not set to the 
correct time.

"

Did a power failure occur? Reset 
the clock. (Refer to page 10.)

"

When a button is pressed, 
the unit does not respond.

"

Set this unit to the power stand-
by mode and then turn it back on.

"

If the unit still malfunctions, reset 
it. (Refer to page 30.)

"

No sound is heard.

"

Is the volume level set to "0"?

"

Are the headphones connected?

"

Are the speaker wires discon-
nected?

"

Playback does not start.

"

Is the disc loaded upside down?

"

Playback stops in the mid-
dle or is not performed 
properly.

"

Does the disc satisfy the stan-
dards?

"

Is the disc distorted or 
scratched?

"

Playback sounds are 
skipped, or stopped in the 
middle of a track.

"

Is the unit located near excessive 
vibrations?

"

Is the disc very dirty?

"

Has condensation formed inside 
the unit?

"

The radio makes unusual 
noises continuously.

"

Is the unit placed near the TV or 
computer?

"

Is the FM aerial or AM loop aerial 
placed properly? Move the aerial 
away from the AC power lead if 
it's located nearby.

"

Cannot record.

"

Is the erase-prevention tab re-
moved?

"

Cannot record tracks with 
proper sound quality.

"

Is it a normal tape? (You cannot 
record on a metal or CrO  tape.)

"

Cannot erase completely.

"

Sound skipping.

"

Is there any slack?

"

Is the tape stretched?

"

Cannot hear treble.

"

Are the capstans, pinch rollers, 
or heads dirty?

"

Sound fluctuation.

"

Cannot remove the tape.

"

If a power failure occurs during 
playback, the heads remain en-
gaged with the tape. Do not open 
the compartment with great 
force.