Read Sharp CD-E700H User Guide / Operation Manual online
02/12/6
CD-E700H(H)E1.fm
E-10
ENGLISH
8
CD-E700H
Basic
Operati
o
n
Setting the clock
In this example, the clock is set for the 24-hour (0:00) display.
To confirm the time display:
Note:
The "CLOCK" or time will flash at the push of the CLOCK button
when the AC power supply is restored after a power failure or
unplugging the unit.
Readjust the clock as follows.
The "CLOCK" or time will flash at the push of the CLOCK button
when the AC power supply is restored after a power failure or
unplugging the unit.
Readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" is not flash-
ing in step 2, step 3 (for selecting the 24-hour or 12-hour display)
will be skipped.
Perform "Setting the clock" from step 1. If the "CLOCK" is not flash-
ing in step 2, step 3 (for selecting the 24-hour or 12-hour display)
will be skipped.
To change the 24-hour or 12-hour display:
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK button and within 5 seconds, press the
MEMORY/SET button.
MEMORY/SET button.
3
Press the TUNING/TIME ( or ) button to select 24-hour or
12-hour display and then press the MEMORY/SET button.
12-hour display and then press the MEMORY/SET button.
"0:00"
The 24-hour display will appear.
(0:00 - 23:59)
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
"AM 0:00"
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
Note that this can only be set when the unit is first installed or it
has been reset. [Refer to "Clearing all the memory (reset)" on
page 30 for details.]
has been reset. [Refer to "Clearing all the memory (reset)" on
page 30 for details.]
4
Press the TUNING/TIME ( or ) button to adjust the hour
and then press the MEMORY/SET button.
and then press the MEMORY/SET button.
"
Press the TUNING/TIME ( or ) button once to advance
the time by 1 hour. Hold it down to advance continuously.
the time by 1 hour. Hold it down to advance continuously.
"
When the 12-hour display is selected, "AM" will change au-
tomatically to "PM".
tomatically to "PM".
5
Press the TUNING/TIME ( or ) button to adjust the min-
utes and then press the MEMORY/SET button.
utes and then press the MEMORY/SET button.
"
Press the TUNING/TIME ( or ) button once to advance
the time by 1 minute. Hold it down to change the time in 5-
minute intervals.
the time by 1 minute. Hold it down to change the time in 5-
minute intervals.
"
The hour will not advance even if minutes advance from "59"
to "00".
to "00".
Press the CLOCK button.
The time display will appear for about 5
seconds.
The time display will appear for about 5
seconds.
1
Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 30 for details.]
memory (reset)" on page 30 for details.]
2
Perform "Setting the clock" from step 1.
Click on the first or last page to see other CD-E700H service manuals if exist.