CD-E700 (serv.man7). Removing and reinstalling the main parts (Inc. Adjustment) - Sharp Audio Service Manual (repair manual). Page 5

– 13 –

                     Error Contents

CD

Pickup Mechanism Error.

'ER-CD**'

01: PU-IN SW Detection NG.

CD Changer Mechanism Error.

'ER-CD**'

10: Changer Error.

 (*)

11: Initial Error.

CD DSP Communication Error

'ER-CD**'

31: DSP COMMUNICATION ERROR

Focus Not Match.

'NO DISC'

TUN

PLL Unlock.

FM 87.5 MHz

PLL Unlock.

(*) CHECKING:
If CD changer mechanism error is detected, 'CHECKING' will be display instead of 'ER-CD**' display 'ER-CD**' will only be display
when CD changer mechanism error had been detected for the 5 th times.

Speaker abnormal detection and +B PROTECTION display
In case speaker abnormal detection or +B PROTECTION had occured, it can be check by pressing 'POWER', 'VIDEO' and 'X-
BASS' key twice. Display will show "S** B**". S is referring to speaker abnormal detection and B is referring to +B PROTECTION.
** is in hex valve.

+B PROTECTION is condition when irregular process occur on power supply line.

BEFORE TRANSPORTING THE UNIT
The following process need to be taken after set tapering/parts replacement.

1. Press the Power On Button to enter Power Stand-by mode.
2. While pressing down the   button and the X-Bass/Demo button, press the Power button until "CLEAR AL" appears
3. While pressing down the  

  button and the X-Bass/Demo button , press the Power  button until "WAIT" 

"FINISHED" appears.

4. Unplug the AC cord and the unit is ready for transporting.