Read Sharp CD-DVD500 (serv.man22) Service Manual online
– 13 –
CD-DVD500H
Playing a DVD/CD (DVDs/CDs)
1
Press the DVD/CD button.
2
Press the
OPEN/CLOSE button to
open the disc tray
.
3
Place the DVD(s) or CD(s) on the disc
tray
, label side up.
When loading a third disc, press the
DISC SKIP
button to turn the disc tray
,
then place the DVD or CD in the open
position.
4
Press the
OPEN/CLOSE button to
close the disc tray
.
5
T
o
select the DVD or CD you want to lis-
ten to first, press one of the
1 -
3
buttons.
6
Press the
button to start playback.
12 cm (5”)
8 cm (3”)
Listening to the radio
FM stereo mode indicator
FM stereo receiving indicator
1
Press the TUNER (BAND) button repeat-
edly to select the desired frequency
band (FM or
AM).
2
Press the TUNING/TIME (
or
) but-
ton to tune in to the desired station.
When the TUNING/TIME (
or
) button
is pressed for more than 0.5 seconds,
scanning will start automatically and the
tuner will stop at the first receivable
broadcast station.
T
o
receive an FM stereo transmission:
Press the TUNER (BAND) button to display “ST”.
“
”
will appear when an FM broadcast is in ste-
reo.
Listening to a cassette tape (T
APE 1 or T
APE 2)
TAPE 1
TAPE 2
1
Open the cassette door by pushing the
area marked “
PUSH EJECT”.
2
Load the cassette into the T
APE 1 or
T
APE 2 cassette compartment with the
side to be played facing toward you.
3
Press the T
APE (1
2) button to select
the cassette you want to listen to.
4
Press the
button to start playback.
If trouble occurs
When this product is subjected to strong external interference (mechanical shock, excessive static electricity
, abnormal
supply voltage due to lightning, etc.) or if it is operated incorrectly
, it may malfunction.
If such a problem occurs, do the following:
1.
Set the unit to the stand-by mode and turn the power on again.
2.
If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by resetting it.
Clearing all the memory (reset)
1
.
Press the ON/ST
AND-BY button to enter the power stand-by mode.
2
.
Whilst
pressing down the
button and X-BASS/DEMO button, press the ON/ST
AND-BY
button until “CLEAR
AL” appears.
Caution:
This operation will erase all data stored in memory including clock, timer settings, tuner preset.
Cleaning the tape-handling parts
Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab
moistened with commercial head/pinch roller cleaner or isopropyl alcohol.
When cleaning the heads, pinch rollers, etc., unplug the unit which contains high voltages.
After long use, the deck’
s heads and capstans may become
magnetised, causing poor sound. D
emagnetise these
parts once every 30 hours of playing/recording time by using a commercial tape head demagnetise. Read the
demagnetiser
’s instructions carefully before use.
TAPE 1
TAPE 2
A
C
C
D
E
B
B
A
Playback head
B
Capstan
C
Pinch roller
D
Erase head
E
Recording/Playback head
Click on the first or last page to see other CD-DVD500 (serv.man22) service manuals if exist.