Read Sharp CD-DP900 (serv.man9) User Guide / Operation Manual online
10
CD-DP900E(UK)_1.fm
02/1/11
CD-DP900E
Prepara
tion f
o
r U
s
e
- S
y
s
te
m
c
onne
c
tion
s
-
System connections
Removing the transport screw
Before turning the power on, be sure to remove the transport screw on
the back of the unit using a flat head screwdriver or a coin.
the back of the unit using a flat head screwdriver or a coin.
Note:
This screw is required when transporting the unit again. Please keep it (see page 29).
Aerial connection
Note:
Placing the aerial on the stereo system or near the AC power lead may cause noise
pickup. Place the aerial away from the stereo system for better reception.
pickup. Place the aerial away from the stereo system for better reception.
Installing the AM loop aerial:
External FM aerial:
Use an external FM aerial if you require better reception. Consult your dealer.
AM loop aerial
FM aerial
Front speaker
(Left)
Front speaker
(Right)
Transport screw
Wall socket
(AC 230-240 V, 50 Hz)
(AC 230-240 V, 50 Hz)
Surround speaker
(Right)
Surround speaker
(Left)
Centre speaker
Supplied FM aerial:
Connect the FM aerial wire to the FM 75
OHMS socket and position the FM aerial wire
in the direction where the strongest signal can
be received.
OHMS socket and position the FM aerial wire
in the direction where the strongest signal can
be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP
socket. Position the AM loop aerial for opti-
mum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
socket. Position the AM loop aerial for opti-
mum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
< Assembling >
< Attaching to the wall >
Wall
Screws
(not
supplied)
External FM aerial
Click on the first or last page to see other CD-DP900 (serv.man9) service manuals if exist.