Read Sharp CD-DP2400H User Guide / Operation Manual online
16
CD-DP2400H(E)2.fm
01/7/17
CD-DP2400H
CD Pla
y
ba
c
k
- L
ist
en
in
g
t
o
a CD
(
C
Ds)
-
Listening to a CD (CDs) (continued)
To interrupt playback:
Press the CD button on the remote control.
To resume playback from the same point, press the button.
To resume playback from the same point, press the button.
To stop playback:
Press
the
(CD )
button.
To remove the CDs:
Whilst in the stop mode, press the OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to
rotate the disc tray and remove the remaining disc.
The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to
rotate the disc tray and remove the remaining disc.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Caution:
!
Do not place two CDs in one disc tray.
!
Do not push the disc tray whilst it is moving.
!
Do not turn the disc tray by hand. This may cause malfunctions.
!
If the power fails whilst the tray is open, wait until the power is restored.
!
If the disc tray is stopped forcibly, "ERR 0203" will appear in the display and the
unit will not function. If this occurs, press the ON/STAND-BY button to enter the
power stand-by mode and then turn the power on again.
unit will not function. If this occurs, press the ON/STAND-BY button to enter the
power stand-by mode and then turn the power on again.
!
If TV or radio interference occurs during CD operation, move the unit away from
the TV or radio.
the TV or radio.
!
If a disc is damaged, dirty, or loaded upside down, the disc will be skipped.
"
To locate the beginning of a track
Notes:
!
You can locate the beginning of a track on a single disc only.
!
The
/
or
/
button on the remote control allows you to locate the
beginning of a track.
"
To locate the desired portion
Notes:
!
Normal playback will resume when the
or
button is released.
!
You can locate the desired portion on a single disc only.
!
When the end of the last track is reached during fast forward, "END" will appear on
the display and CD operation will be paused. When the beginning of the first track
is reached during fast reverse, the unit will enter the playback mode.
the display and CD operation will be paused. When the beginning of the first track
is reached during fast reverse, the unit will enter the playback mode.
!
The
/
or
/
button on the remote control allows you to locate the
desired portion.
7
Press the / ( ) button to start playback.
!
Playback will begin from track 1 on the disc you have selected to play. After
that disc finishes playing, the next disc will automatically start playback.
that disc finishes playing, the next disc will automatically start playback.
!
When the last track on the third disc has finished playing, the CD player will
stop automatically.
stop automatically.
!
When there is no CD in one of the disc 1 - 3 positions, that position will be
skipped and the next CD will be played.
skipped and the next CD will be played.
To move to the beginning of the next track:
Press the
button for less than 0.5 seconds during playback.
!
You can skip to any track by pressing the
button repeatedly until the desired track
number appears.
To restart the track being played:
Press the
button for less than 0.5 seconds during playback.
!
You can skip to any track by pressing the
button repeatedly until the desired track
number appears.
For audible fast forward:
Press and hold down the
button during playback.
For audible fast reverse:
Press and hold down the
button during playback.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Click on the first or last page to see other CD-DP2400H service manuals if exist.