Read Sharp CD-DP2400H (serv.man19) Service Manual online
– 7 –
CD-DP2400H
Accessories
1
2
3
Battery installation of remote control
Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
Remove the
Insert the batteries
Replace the cover.
battery cover.
as shown.
1
1
2
2
FM aerial 1
Remote control 1
AM loop aerial 1
System connections
3
3
AM loop aerial
FM aerial
Red
Black
Black
Front speaker (Right)
Front speaker (Left)
Wall socket
(AC 230 V, 50 Hz)
(AC 230 V, 50 Hz)
RCA lead
(not supplied)
(not supplied)
To the line
output sockets
output sockets
VCR, DVD, etc.
TV
Centre speaker
Surround speaker
(Right)
(Right)
Surround speaker
(Left)
(Left)
Grey
Orange
Orange
Centre speaker
Surround speaker
(Right)
(Right)
Surround speaker
(Left)
(Left)
Front speaker
(Right)
(Right)
Front speaker
(Left)
(Left)
■
If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal sup-
ply voltage due to lightning, etc.) or if it is operated incorrectly, it
may malfunction.
(mechanical shock, excessive static electricity, abnormal sup-
ply voltage due to lightning, etc.) or if it is operated incorrectly, it
may malfunction.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power
on again.
2. If the unit is not restored in the previous operation, un-
plug and plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory
by resetting it.
If neither operation above restores the unit, clear all the memory
by resetting it.
■
Clearing all the memory (reset)
1. Press the ON/STAND-BY button to enter the power
stand-by mode.
2. Whilst pressing down the
0 / R
0 / R
0 / R
0 / R
0 / R
button and the X-BASS/
DEMO button, press the ON/STAND-BY button until
“CLEAR AL” appears.
“CLEAR AL” appears.
Caution:
This operation will erase all data stored in memory including
clock, timer settings, tuner preset, and CD programme.
This operation will erase all data stored in memory including
clock, timer settings, tuner preset, and CD programme.
■
Maintenance
●
Dirty heads, capstans or pinch rollers can cause poor
sound and tape jams. Clean these parts with a cotton swab
moistened with commercial head/pinch roller cleaner or
isopropyl alcohol.
sound and tape jams. Clean these parts with a cotton swab
moistened with commercial head/pinch roller cleaner or
isopropyl alcohol.
●
When cleaning the heads, pinch rollers, etc., unplug the
unit which contains high voltages.
unit which contains high voltages.
●
After long use, the deck’s heads and capstans may be-
come magnetised, causing poor sound. Demagenetise
these parts once every 30 hours of playing/recording time
by using a commercial tape head demagnetiser. Read the
demagnetiser’s instructions carefully before use.
come magnetised, causing poor sound. Demagenetise
these parts once every 30 hours of playing/recording time
by using a commercial tape head demagnetiser. Read the
demagnetiser’s instructions carefully before use.
●
Clean the dust or stain on the CD pickup lens using a com-
mercial cleaning disc (brush type).
mercial cleaning disc (brush type).
TAPE 1
TAPE 2
Listening to a cassette tape (TAPE 1 or TAPE 2)
A Playback head
B Capstan
D Erase head
E Recording/Playback head
C Pinch roller
TAPE 1
TAPE 2
A
C
C
D
E
B
B
1
Open the cassette door by pushing
the area marked “
the area marked “
7
7
7
7
7
PUSH EJECT”.
2
Load a cassette into the TAPE 1 or
TAPE 2 cassette compartment with
the side to be played facing toward
you.
TAPE 2 cassette compartment with
the side to be played facing toward
you.
3
Press the TAPE (1
V
V
V
V
V
2) button to se-
lect the cassette you want to listen
to.
to.
4
Press the
0 / R
0 / R
0 / R
0 / R
0 / R
button to start play-
back.
Turn on your system
4
4
1
2
The first time the unit is plugged
in, the unit will enter the demon-
stration mode. You will see words
scroll.
in, the unit will enter the demon-
stration mode. You will see words
scroll.
Press the
X-BASS/DEMO button
to cancel the demon-
stration mode.
X-BASS/DEMO button
to cancel the demon-
stration mode.
Press the ON/
STAND-BY button to
turn the power on.
STAND-BY button to
turn the power on.
12 cm (5”)
8 cm (3”)
Listening to a CD (CDs)
FM stereo mode indicator
FM stereo receiving indicator
Listening to the radio
1
Press the CD button.
2
Press the
7
7
7
7
7
OPEN/CLOSE button to
open the disc tray
.
3
Place the CD(s) on the disc tray, la-
bel side up.
When loading a third disc, press the
DISC SKIP button to turn the disc
tray, then place the CD in the open
position.
bel side up.
When loading a third disc, press the
DISC SKIP button to turn the disc
tray, then place the CD in the open
position.
4
Press the
7
7
7
7
7
OPEN/CLOSE button to
close the disc tray.
5
To select the CD you want to listen
to first, press one of the DISC-1 -
DISC-3 buttons.
to first, press one of the DISC-1 -
DISC-3 buttons.
6
Press the
0 / R
0 / R
0 / R
0 / R
0 / R
button to start play-
back.
1
Press the TUNER (BAND) button re-
peatedly to select the desired fre-
quency band (FM or AM).
peatedly to select the desired fre-
quency band (FM or AM).
2
Press the TUNING/TIME (
X
X
X
X
X
or
W
W
W
W
W
)
button to tune in to the desired sta-
tion.
When the TUNING/TIME button is
pressed for more than 0.5 seconds,
scanning will start automatically and
the tuner will stop at the first receiv-
able broadcast station.
tion.
When the TUNING/TIME button is
pressed for more than 0.5 seconds,
scanning will start automatically and
the tuner will stop at the first receiv-
able broadcast station.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the
“ST” indicator.
Press the TUNER (BAND) button to display the
“ST” indicator.
●
“
j
j
j
j
j
” will appear when an FM broadcast is in
stereo.
Click on the first or last page to see other CD-DP2400H (serv.man19) service manuals if exist.