Read Sharp CD-CH1000 User Guide / Operation Manual online
11
Web-site: www.sharp.co.uk/support Help Line: 0990 274277 (office hours)
Preparation for Use
■
Aerial connection
Supplied FM aerial :
Connect the FM aerial wire to the FM 75 OHMS socket and position the FM
aerial wire in the direction where the strongest signal can be received.
Connect the FM aerial wire to the FM 75 OHMS socket and position the FM
aerial wire in the direction where the strongest signal can be received.
Supplied AM loop aerial :
Connect the AM loop aerial to the AM LOOP socket. Position the AM loop
aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or
attach it to a stand or a wall with screws (not supplied).
Connect the AM loop aerial to the AM LOOP socket. Position the AM loop
aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or
attach it to a stand or a wall with screws (not supplied).
Notes:
●
Placing the aerial on the stereo system or near the AC power lead may cause noise
pickup.
Place the aerial away from the stereo system for better reception.
pickup.
Place the aerial away from the stereo system for better reception.
●
Do not connect the attached FM aerial to an external FM aerial. Otherwise, trouble
may occur.
may occur.
Installing the AM loop aerial:
Assembling
1
2
3
4
Attaching to the wall
External FM aerial:
Use an external FM aerial if you require better reception.
Consult your dealer.
Consult your dealer.
External FM aerial
■
Speaker connection
Main terminals (left side of the rear):
Connect the blue wire to the (+) and the black one to the (–).
Connect the blue wire to the (+) and the black one to the (–).
Subwoofer terminals (right side of the rear):
Connect the red wire to the (+) and the black one to the (–).
Connect the red wire to the (+) and the black one to the (–).
Caution:
●
Connect the speaker wires to the speakers first, then to the unit.
●
Never mistake the MAIN and the SUBWOOFER terminals.
The stereo system or the speakers may be damaged .
The stereo system or the speakers may be damaged .
●
Only the included speakers should be used with this product.
Do not use other speakers with this unit or use the supplied speakers with other
units.
Do not use other speakers with this unit or use the supplied speakers with other
units.
●
Do not mistake the right and the left channels.
The right speaker is the one on the right side when you face the unit.
The right speaker is the one on the right side when you face the unit.
●
Do not let the bare speaker wires touch each other.
,,
,,
Incorrect
Incorrect
●
Do not stand or sit on the speakers. You may be injured.
■
Connecting the AC power lead
After making all connections, plug the unit.
If you plug the unit first, the unit will enter the demonstration mode (see page 13).
If you plug the unit first, the unit will enter the demonstration mode (see page 13).
Note:
Unplug the unit if it will not be used for a prolonged period of time.
Unplug the unit if it will not be used for a prolonged period of time.
Wall
Screws
*CH1000H_P10_12(Preparation)
00.7.7, 3:13 PM
11
Click on the first or last page to see other CD-CH1000 service manuals if exist.