Read Sharp CD-CH1000 (serv.man10) Service Manual online
CD-CH1000H/CD-CH1000W
– 16 –
CD MECHANISM SECTION
Perform steps 1 to 7 of the disassembly method to remove the
CD mechanism. (See page 14.)
CD mechanism. (See page 14.)
Figure 16-1
How to Remove the pickup (See Fig. 16-2.)
1. Remove the screws (A1) x 2 pcs., to remove shaft (A2) x 1
pc.
2. Remove stop washer (A3) x 1 pc., to remove gear (A4) x 1
pc.
3. Remove the pickup.
Note:
After removing the connector for the optical pickup from the
connector, wrap the conductive aluminium foil around the
front end of connector remove to protect the optical pickup
from electrostatic damage.
After removing the connector for the optical pickup from the
connector, wrap the conductive aluminium foil around the
front end of connector remove to protect the optical pickup
from electrostatic damage.
Figure 16-2
Figure 16-3
How to Remove the tray motor/main cam motor
(See Fig. 16-3.)
(See Fig. 16-3.)
1. Remove the screws (B1) x 4 pcs., to remove the CD Servo
PWB.
2. Remove the (1) front top plate, (2) changer box, left/right
and (3) disc trays 1-6. After that, disassemble as shown in
the figure.
the figure.
3. Remove the screws (B2) x 4 pcs.
4. Remove the tray motor and main cam motor.
4. Remove the tray motor and main cam motor.
Note:
The parts of (1), (2) and (3) correspond to the drawing Nos.
117, 102, 103 and 108 to 113 of the CD change mechanism
disassembly drawing.
Remove the screws of 117, 102 and 103, and the parts of (1),
(2) and (3) will be ready for removal and the screws of the tray
motor and main cam motor will be visible.
The parts of (1), (2) and (3) correspond to the drawing Nos.
117, 102, 103 and 108 to 113 of the CD change mechanism
disassembly drawing.
Remove the screws of 117, 102 and 103, and the parts of (1),
(2) and (3) will be ready for removal and the screws of the tray
motor and main cam motor will be visible.
CD CHANGER MECHANISM SECTION
Perform steps 1 to 5 of the disassembly method to remove the
CD changer mechanism. (See page 14.)
CD changer mechanism. (See page 14.)
FRONT PANEL SECTION
Perform steps 1 to 4 of the disassembly method to remove the
front panel.
front panel.
How to remove the control panel motor
(See Fig. 16-1)
(See Fig. 16-1)
1. Remove the control panel.
2. Remove the screws (E1) x 6 pcs., to remove the CD changer
2. Remove the screws (E1) x 6 pcs., to remove the CD changer
door panel.
3. Remove the screws (F1) x 2 pcs., to remove the control
panel motor.
CD Changer
Door Panel
Door Panel
CD Changer
Door Panel
Door Panel
Control
Panel Motor
Panel Motor
Gear Box A
(E1)x1
ø2.6x10mm
ø2.6x10mm
(E1)x3
ø2.6x10mm
ø2.6x10mm
(E1)x2
ø2.6x10mm
ø2.6x10mm
(F1)x2
ø2x5mm
ø2x5mm
Motor PWB
Control
Panel Motor
Panel Motor
Gear Box B
Gear Box A
Control Panel
(A1)x1
ø2.6x6mm
ø2.6x6mm
CD
Mechanism
Mechanism
Stop Washer
(A3)x1
(A3)x1
Gear
(A4)x1
(A4)x1
Shaft
(A2)x1
(A2)x1
Pickup
(A1)x1
ø2.6x6mm
ø2.6x6mm
Main Cam Motor
Tray Motor
CD Servo
PWB
PWB
(1) Front Top Plate
(2) Changer Box,
Left
Left
(2) Changer Box,
Right
Right
(3) Disc Tray,1-6
CD Changer Mechanism
(B1)x4
ø3x10mm
(B2)x4
ø2.6x4mm
Click on the first or last page to see other CD-CH1000 (serv.man10) service manuals if exist.