CD-C661H - Sharp Audio User Guide / Operation Manual. Page 5

Read Sharp CD-C661H User Guide / Operation Manual online

<P=003>
(Continued)
SPEAKERS
LEFT
RIGHT
RATED SPEAKER INPEDANCE :
6 OHMS MIN.
1
2
3
Speaker connection
Connect each speaker wire to the SPEAKER terminals as shown.
Use speakers with an impedance of 6 ohms or more, as lower
impedance speakers can damage the unit.
Connect the black wire to the minus (
) terminal, and the red
wire to the plus (+) terminal.
Caution:
When connecting the speakers to the unit, connect the wires
to the speakers first, and then to the terminals on the unit.
Do not mix the right channel and left channel wiring when con-
necting the speakers to the unit.
Do not let bare speaker wires touch each other as this may
damage the amplifier and/or speakers.
Do not stand or sit on the speakers. If the speakers fall or
collapse, you may be injured.
Removing the speaker grilles
1
Remove the lower part of the speaker grille first.
2
Remove the upper part of the speaker grille.
Caution:
When the speaker grilles are removed, the speaker diaphragms
are exposed. Make sure nothing comes into contact with the
speaker diaphragms.
Mounting the speaker grilles
Fit the four posts on the speaker grille into the mounting holes
and push them lightly with the palm of your hand to secure.
Placing the speaker system
The super tweeters are positioned differently for the left and right
speakers. For best performance, place the speakers according
to the diagram to the left.
Right speaker
Left speaker
Black Red
Black
Red
Left speaker
Right speaker
CD-C661H(SUK) TINSE0264AWZZ
4
Page of 28
Display

Click on the first or last page to see other CD-C661H service manuals if exist.