Read Sharp CD-C661H User Guide / Operation Manual online
<P=004>
(Continued)
2,4
3
■
Preset tuning
You can store up to 40 stations in memory (40 stations consisting
of any combination of FM and AM stations you like) and recall
them at the push of a button.
of any combination of FM and AM stations you like) and recall
them at the push of a button.
To enter stations into memory:
1
Perform steps 1 - 6 in the "Tuning" section.
2
Press the MEMORY/SET button.
●
"MEMORY" and the preset channel number will flash.
3
Within 30 seconds, press the PRESET (
X
or
W
) button to
make the preset channel number flash in the display.
●
Store the stations in memory, in order, starting with preset
channel 1.
channel 1.
4
Within 30 seconds, press the MEMORY/SET button to store
that station in the selected station preset number memory.
that station in the selected station preset number memory.
●
If the "MEMORY" and preset number indicators go out before
the station is memorised, repeat the operation from step 2.
the station is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other preset stations, or to change
a preset station.
a preset station.
●
When a new station is stored in the selected station preset
number memory, the contents previously memorised will be
erased.
number memory, the contents previously memorised will be
erased.
●
To store an RDS station in memory, perform steps 2 - 4 whilst
the RDS station name is being displayed.
the RDS station name is being displayed.
To recall a memorised station:
Press the PRESET (
X
or
W
) button for less than 0.5 seconds
to select the desired station.
●
The stations (preset channel number, frequency and fre-
quency band) which have been stored in memory will appear
in the display in numerical order, irrespective of the frequency
bands.
quency band) which have been stored in memory will appear
in the display in numerical order, irrespective of the frequency
bands.
Note:
When searching for a memorised station, do not press the
PRESET button for more than 0.5 seconds.
When the PRESET button is pressed for more than 0.5 seconds,
the unit will enter the preset memory scan mode.
When searching for a memorised station, do not press the
PRESET button for more than 0.5 seconds.
When the PRESET button is pressed for more than 0.5 seconds,
the unit will enter the preset memory scan mode.
Backup function:
The backup function protects all station presets for a few hours
should there be a power failure or the AC power lead is removed
from the AC socket.
should there be a power failure or the AC power lead is removed
from the AC socket.
■
Preset memory scan
The stations saved in the preset memory can be scanned auto-
matically.
matically.
1
To scan the preset stations, press the PRESET (
X
or
W
)
button for more than 0.5 seconds.
●
The station preset number will flash and the programmed sta-
tions will be tuned in sequentially, for 5 seconds each.
tions will be tuned in sequentially, for 5 seconds each.
2
Press the PRESET (
X
or
W
) button again to stop the memory
scan at the desired station.
Note:
When the preset memory does not have any stations stored in
it, the preset memory scan will not function.
When the preset memory does not have any stations stored in
it, the preset memory scan will not function.
(Main unit operation)
1,2
1,2
CD-C661H(SUK) TINSE0264AWZZ
12
Click on the first or last page to see other CD-C661H service manuals if exist.