Read Sharp CD-C621H (serv.man2) User Guide / Operation Manual online
<P=002>
USING EXTERNAL UNITS
1,5
3,4
2
■
Video/Auxiliary (Audio signal) input
To listen to or record signals from external sources
through this unit:
through this unit:
1
Use a separately available RCA lead to connect the desired
external unit to the VIDEO/AUX sockets.
(red
external unit to the VIDEO/AUX sockets.
(red
→
right channel, white
→
left channel)
●
When using video equipment (Laser Disc player or VCR), be
sure to connect the audio output to this unit and the video
output to a television.
sure to connect the audio output to this unit and the video
output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the VIDEO/AUX button.
4
Operate the external unit.
5
To record the sound from the external unit, perform steps 2
- 4 of the "Recording from the built-in radio" section on page
24.
- 4 of the "Recording from the built-in radio" section on page
24.
Note:
●
To prevent hum interference, do not place this unit near a
television receiver.
television receiver.
■
Headphones
●
Before plugging in or unplugging the headphones, make sure
the volume level is reduced.
the volume level is reduced.
●
Be sure your headphones have a 3.5 mm (1/8") diameter plug
and are between 16 ohms and 50 ohms impedance. The rec-
ommended impedance is 32 ohms.
and are between 16 ohms and 50 ohms impedance. The rec-
ommended impedance is 32 ohms.
●
When headphones are connected, the speakers are discon-
nected automatically. Adjust the VOLUME control for the
desired volume.
nected automatically. Adjust the VOLUME control for the
desired volume.
To the line output socket
RCA
lead
lead
TRANSPORTING THE UNIT
Before you move this product to a new location, proceed
as follows:
as follows:
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the OPEN/CLOSE button to open the disc tray.
●
Remove all CDs inserted in the unit.
4
Press the OPEN/CLOSE button to close the disc tray.
●
Make sure that "NO DISC" is displayed.
5
Press the ON/STAND-BY button to enter the stand-by mode,
and then unplug the AC power lead from the AC socket.
and then unplug the AC power lead from the AC socket.
CD-C621H(SUK) TINSE0245AWZZ
26
Click on the first or last page to see other CD-C621H (serv.man2) service manuals if exist.