Read Sharp CD-C611H User Guide / Operation Manual online
HK
<P=001>
3
4
15
15
(Continued)
■
To mount the surround speakers on the wall
The design of the surround speakers allows them to be hung on
the wall.
Be sure to use the type and size of screw that is shown to the
left.
the wall.
Be sure to use the type and size of screw that is shown to the
left.
1
Make a hole in the wall using a drill.
2
Drive a wall mount plug into the hole using a hammer. Drive
the wall mount plug in until it is flush with the wall surface.
the wall mount plug in until it is flush with the wall surface.
3
Drive one screw into the wall mount plug for each speaker
as shown in the illustration.
as shown in the illustration.
●
Drive the screws, so there is about a 5 mm (3/16") space
between the wall and the head of the screw.
between the wall and the head of the screw.
4
Mount the surround speaker on the wall so that the screw
head is inserted into the slot on the surround speaker.
head is inserted into the slot on the surround speaker.
■
Remote control
●
When inserting or removing the batteries, push them towards
the
the
ë
battery terminals.
●
Installing the batteries incorrectly may cause the unit to mal-
function.
function.
Precautions for battery use:
●
Insert the batteries according to the direction indicated in the
battery compartment.
battery compartment.
●
Replace all old batteries with new ones at the same time.
●
Do not mix old and new batteries.
●
Remove the batteries if they are weak or if the unit will not
be used for long periods of time. This will prevent potential
damage due to battery leakage.
be used for long periods of time. This will prevent potential
damage due to battery leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Notes concerning use:
●
Replace the batteries if the operating distance is reduced or if
the operation becomes erratic.
the operation becomes erratic.
●
Periodically clean the transmitter LED on the remote control
and the sensor on the main unit with a soft cloth.
and the sensor on the main unit with a soft cloth.
●
Exposing the sensor on the main unit to strong light may in-
terfere with operation. Change the lighting or the direction of
the unit.
terfere with operation. Change the lighting or the direction of
the unit.
●
Keep the remote control away from moisture, excessive heat,
shock, and vibrations.
shock, and vibrations.
1
2
32 mm (1-1/4")
8-9 mm (3/8")
5 mm (3/16")
3.2 mm (1/8")
Min. 22 mm (7/8")
9 mm (3/8")
Wall surface
Wall mounting screw
Wall surface
●
2 "AA" size batteries
( UM / SU M -3 , R6 ,
HP-7 or similar)
( UM / SU M -3 , R6 ,
HP-7 or similar)
0.2 m - 6 m
(8" - 20’)
(8" - 20’)
CD-C611H(SUK) TINSE0251AWZZ
6
Click on the first or last page to see other CD-C611H service manuals if exist.