Read Sharp CD-C611H User Guide / Operation Manual online
<P=004>
(Continued)
■
To specify station names and select stations
manually (station select)
manually (station select)
You can received for a desired station by specifying the station
name (BBC R1, BBC R2, etc.) from among the stations that have
been stored in memory.
(ASPM is convenient for storing stations in memory.)
Before starting this operation, you must store one or more station
names in memory.
name (BBC R1, BBC R2, etc.) from among the stations that have
been stored in memory.
(ASPM is convenient for storing stations in memory.)
Before starting this operation, you must store one or more station
names in memory.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button.
3
Press the TUNER (BAND) button to select the FM ST or FM
band.
band.
4
Press the STATION button.
●
"STATION" and "SELECT" will appear alternately for about 6
seconds.
seconds.
5
Within 6 seconds, press the PRESET (
X
or
W
) button to
select a desired station name you want.
●
Each time the button is pressed, the station name will appear.
If the button is held down for more than 0.5 seconds, the
station name will continuously change.
If the button is held down for more than 0.5 seconds, the
station name will continuously change.
6
Whilst the selected station name is flashing (within 6
seconds), press the STATION button again.
seconds), press the STATION button again.
●
After the selected station name has been lit for 1 second, the
preset station which corresponds to the selected station name
will be recalled.
preset station which corresponds to the selected station name
will be recalled.
To cancel the station select operation:
Press the STATION button whilst "STATION" and "SELECT" ap-
pear alternately.
Press the STATION button whilst "STATION" and "SELECT" ap-
pear alternately.
To try to store a station name again, if the wrong name
was stored in memory by mistake:
When you store station names in memory using the ASPM func-
tion, the correct station names may not actually be stored if there
is lots of noise or if the RDS station signal is too weak.
In this case, try storing station names in memory using the fol-
lowing procedure.
was stored in memory by mistake:
When you store station names in memory using the ASPM func-
tion, the correct station names may not actually be stored if there
is lots of noise or if the RDS station signal is too weak.
In this case, try storing station names in memory using the fol-
lowing procedure.
1
4,6
2,3
5
4
5
6
1
Press the STATION button.
2
Within 6 seconds, press the PRESET (
X
or
W
) button to
check whether the station names are correct.
3
If you find a station name that is wrong, press the STATION
button again within 6 seconds to recall the preset station,
which corresponds to the station name.
button again within 6 seconds to recall the preset station,
which corresponds to the station name.
4
After the preset station has been received and the correct
station name has been displayed, press the MEMORY/SET
button.
station name has been displayed, press the MEMORY/SET
button.
5
Within 30 seconds, Press the MEMORY/SET button whilst
the preset channel number is flashing.
the preset channel number is flashing.
●
The new station name has been stored in memory correctly.
Notes:
●
When there are no station names stored in memory,
you cannot use this function. In this case, when the
STATION button is pressed, "NOTHING" will flash
for 5 seconds, and the unit will return to the original
display.
you cannot use this function. In this case, when the
STATION button is pressed, "NOTHING" will flash
for 5 seconds, and the unit will return to the original
display.
●
This function can only be used when the FM band
has been selected.
has been selected.
●
The same station name can be stored in different
preset channels. Therefore, when you are choosing
a station name from the presets, the same station
name may be encountered more than once.
preset channels. Therefore, when you are choosing
a station name from the presets, the same station
name may be encountered more than once.
●
In a certain area or during certain time periods, the
station names selected using the station select func-
tion may temporarily be different from the name of
the station you are actually receiving.
station names selected using the station select func-
tion may temporarily be different from the name of
the station you are actually receiving.
(Main unit operation)
CD-C611H(SUK) TINSE0251AWZZ
17
Click on the first or last page to see other CD-C611H service manuals if exist.