Read Sharp CD-C605H (serv.man3) Service Manual online
CD-C605H
– 9 –
How to remove the turntable up/down/loading
motor (See Fig. 9-2)
motor (See Fig. 9-2)
1. Remove the screws (A1) x 2 pcs., to remove the turntable
up/down/loading motor.
How to remove the pickup (See Fig. 9-3)
1. Remove the screws (B1) x 2 pcs., to remove the shaft (B2)
x 1 pc.
2. Remove the stop washer (B3) x 1 pc., to remove the gear
(B4) x 1 pc.
3. Remove the pickup.
Figure 9-3
REMOVING AND REINSTALLING THE MAIN PARTS
CD MECHANISM SECTION
Perform steps 1, 2, 3, and 11 ~15 of the disassembly method
to remove the CD mechanism.
to remove the CD mechanism.
Figure 9-2
Note:
After disconnecting the optical pickup connector, wrap the
front end of connector in conductive aluminum foil to prevent
damage to the optical pickup by static electricity.
After disconnecting the optical pickup connector, wrap the
front end of connector in conductive aluminum foil to prevent
damage to the optical pickup by static electricity.
Figure 9-1
CP-C605H
STEP
REMOVAL
PROCEDURE
FIGURE
1
Speaker
1. Net Frame ............... (A1) x1
9-1
2. Duct Panel .............. (A2) x1
3. Screw ...................... (A3) x4
3. Screw ...................... (A3) x4
(A1) x2
ø2.6x5mm
Turntable/Up/
Loading/Down Motor
Motor
PWB
PWB
(B1) x2
ø2.6x6mm
Shaft
(B2) x1
Stop Washer
(B3)x1
Gear
(B4) x1
CD Mechanism
Pickup
Speaker Box
(A1)x1
Net Frame
Net Frame
(A3)x4
ø4x12mm
(A2)x1
Duct Panle
Duct Panle
Click on the first or last page to see other CD-C605H (serv.man3) service manuals if exist.