CD-C491H - Sharp Audio User Guide / Operation Manual. Page 9

■

Connect the FM aerial wire to the FM 75 OHMS socket and
orient the FM aerial wire in the direction where the strongest
signal can be received.

Connect the MW/LW loop aerial wire to the MW/LW LOOP
socket. Position the MW/LW loop aerial for optimum reception.
Place the MW/LW loop aerial on a shelf, etc., or attach it to a
stand or wall with screws (not supplied).

●

If you still hear static even after adjusting the position of the
MW/LW loop aerial, try reversing the wires or turn off the power
to any external unit not in use.

●

Do not place the aerial wires on the unit. It may result in noise
generation, since the unit is equipped with digital electronics.
Place the MW/LW loop aerial and the FM aerial wire away
from the unit for better reception.

●

If the aerial wires are placed near the AC power lead, they
may cause interference.

Use an external FM aerial (75 ohm coaxial cable) if you require
better reception.
Consult your dealer.

Note:
When an external FM aerial is used, disconnect the supplied FM
aerial wire from the FM 75 OHMS socket.

■

After connecting the speakers and aerials, plug the AC power
lead into a convenient AC socket.
Note:

●

Unplug the AC power lead from the AC socket if the unit will
not be used for a prolonged period of time.

■

When the AC power lead is first connected, the word "DEMO"
will scroll across the display and the unit will enter the demon-
stration mode.
To cancel the demonstration mode, press the DEMO button.
Notes:

●

The DEMO button will only work when the unit is in the stand-
by mode.

●

When the power is on, the DEMO button can be used to select
the equalizer mode.

<P=008>

1

2

3

FM aerial

MW/LW
loop aerial

External FM
aerial

75 ohm coaxial cable

AC 230 V, 50 Hz

To an AC socket

CD-C491H(SUK) TINSE0229AWZZ