CD-C410H (serv.man4) - Sharp Audio Service Manual (repair manual). Page 7

– 7 –

Caution on Disassembly
Follow the below-mentioned notes when disassembling
the unit and reassembling it, to keep it safe and ensure
excellent performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall

outlet before starting to disassemble the unit.

3. Take off nylon bands or wire holders where they need be

removed when disassembling the unit. After servicing
the unit, be sure to rearrange the leads where they were
before disassembling.

4. Take sufficient care on static electricity of integrated

circuits and other circuits when servicing.

LOCK 
     LEVER

1

Speaker

1. Front panel ............. (A1) x1

9-5

2. Screw ..................... (A2) x4

9-6

1

Top Cabinet

1. Screw ..................... (A1) x4

7-1

2

Side Panel

1. Screw ..................... (B1) x6

7-1

(Left/right)

3

CD Player Unit/

1. Turn on the power supply,

7-2

CD Tray Cover

    open the disc tray, take out
    the CD cover, and close.
    (Note 1)
2. Hook ....................... (C1) x3
3. Hook ....................... (C2) x2
4. Socket .................... (C3) x4

4

Back Board

1. Screw ..................... (D1) x5

7-2

5

Main PWB/

1. Screw ..................... (E1) x12

8-1

Display PWB/

2. Socket .................... (E2) x4

Headphone PWB

6

Front Panel

1. Screw ..................... (F1) x2

8-1

2. Hook ....................... (F2) x2

7

Tape Mechanism 1. Open the cassette holder.

8-2

2. Screw...................... (G1) x6

8

Turntable

1. Screw ..................... (H1) x1

8-3

2. Cover ...................... (H2) x1

9

Disc Tray

1. Screw ..................... (J1) x2

8-3

2. Guide ...................... (J2) x2

10

CD Changer

1. Screw ..................... (K1) x4

8-4

Mechanism

11

CD Mechanism

1. Screw ..................... (L1) x1

8-4

Note 1:
How to open the changer manually. (Fig. 7-3)
1. Insert the tip of fine screwdriver into the hole of CD player

base, and press down the worm wheel < A > .

2. Then, turn fully the lock lever in the arrow direction through

the hole on the loading chassis bottom in this state.
After that, push forward the CD player base.

( B1 ) x1
ø3 x10mm

( B1 ) x2
ø3 x12mm

( B1 ) x2
ø3 x12mm

( B1 ) x1
ø3 x10mm

Top Cabinet

Side Panel
(Right)

Side Panel
(Left)

( A1 ) x2
ø3 x12mm

( A1 ) x2
ø3 x12mm

Back Board

CD Tray Cover

CD Player Unit

Hook
( C2 ) x1

Push

Hook
( C2 ) x1

Driver

Driver

Push

( D1 ) x1
ø3 x12mm

( D1 ) x4
ø3 x12mm

Hook
( C1) x3

( C3 ) x3

( C3 ) x1