Read Sharp CD-C3H (serv.man15) Specification online
CD-C3H/CP-C3H
– 3 –
SPECIFICATIONS
CD-C3H
CP-C3H
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER
TO THE OPERATION MANUAL.
TO THE OPERATION MANUAL.
IMPORTANT SERVICE NOTES (FOR UK ONLY)
Before returning the unit to the customer after completion of a
repair or adjustment it is necessary for the following withstand
voltage test to be applied to ensure the unit is safe for the
customer to use.
Setting of Withstanding Voltage Tester and set.
repair or adjustment it is necessary for the following withstand
voltage test to be applied to ensure the unit is safe for the
customer to use.
Setting of Withstanding Voltage Tester and set.
Set name
set value
Withstanding Voltage Tester
Test voltage
4,240 VPEAK
3,000 VRMS
3,000 VRMS
Set time
6 secs
Set current(Cutoff current)
4 mA
Unit
Judgment
OK: The “GOOD” lamp lights.
NG: The “NG” lamp lights and the buzzor sounds.
NG: The “NG” lamp lights and the buzzor sounds.
SHORT-CIRCUIT
AC POWER
SUPPLY CORD
AC POWER
SUPPLY CORD
CONNECT THE PROBE
TO GND TERMINAL
OF PHONO TERMINAL
TO GND TERMINAL
OF PHONO TERMINAL
PROBE
AC
UNIT
WITHSTANDING
VOLTAGE TESTER
VOLTAGE TESTER
+
-
OUT
OF CHASSIS
SCREW
General
Power source:
AC 230 V, 50 Hz
Power
consumption:
consumption:
350 W
Dimensions:
Width; 270 mm (10-5/8")
Height; 356 mm (14-3/16")
Depth; 355 mm (14")
Height; 356 mm (14-3/16")
Depth; 355 mm (14")
Weight:
10.6 kg (23.4 lbs.)
Amplifier section
Output power:
PMPO; 600 W (total)
MPO; 300 W (150 W + 150
W)
(DIN 45 324)
RMS; 200 W (100 W + 100
W)
(DIN 45 324)
MPO; 300 W (150 W + 150
W)
(DIN 45 324)
RMS; 200 W (100 W + 100
W)
(DIN 45 324)
Input terminals:
Video/Auxiliary (audio signal)
×
2; 500 mV/47 kohms
Output terminals:
Speakers; 6 ohms
Headphones; 16-50 ohms
(recommended; 32 ohms)
Line output; 500 mV/47
kohms
CD digital output (optical)
Headphones; 16-50 ohms
(recommended; 32 ohms)
Line output; 500 mV/47
kohms
CD digital output (optical)
Compact disc player section
Type:
3-disc multi-play compact
disc player
disc player
Signal readout:
Non-contact, 3-beam semi-
conductor laser pickup
conductor laser pickup
Rotational speed:
200 - 500 rpm CLV, Approx.
Error correction:
CIRC (Cross Interleave
Reed-Solomon Code)
Reed-Solomon Code)
Quantization:
16-bit linear
Filter:
8-times oversampling digital
filter
filter
D/A converter:
1-bit D/A converter
Frequency
response:
response:
20 - 20,000 Hz
Dynamic range:
90 dB (1 kHz)
Wow and flutter:
Unmeasurable
(less than 0.001% W. peak)
(less than 0.001% W. peak)
Tuner section
Frequency range:
FM; 87.5 - 108 MHz
MW; 522 - 1,620 kHz
LW; 153 - 281 kHz
MW; 522 - 1,620 kHz
LW; 153 - 281 kHz
Cassette deck section
Type:
Compact cassette tape
Frequency response:
50 - 14,000 Hz (Normal tape)
50 - 15,000 Hz (CrO
50 - 15,000 Hz (CrO
2
tape)
Motor:
×
1
Signal/noise ratio:
AC
Tape speed:
4.76 cm/sec. (1-7/8 ips.)
Wow and flutter:
0.2 % (DIN 45 511, playback)
Heads:
TAPE-1: Playback
×
1
TAPE-2: Record/playback
×
1
Erase
×
1
Speaker section
Type:
3-way type [16 cm (6-1/2") woofer,
5 cm (2") tweeter and super tweeter]
5 cm (2") tweeter and super tweeter]
Rated input power:
100 W
Maximum input power: 200 W
Impedance:
Impedance:
6 ohms
Dimensions:
Width; 240 mm (9-1/2")
Height; 350 mm (13-13/16")
Depth; 351.5 mm (13-7/8")
Height; 350 mm (13-13/16")
Depth; 351.5 mm (13-7/8")
Weight:
5.7 kg (12.6 lbs.)/each
Display
