CD-BA3100 (serv.man3). Split - Section 2a - Alternative CD changer mechanical breakdown - 18-24 - Sharp Audio Service Manual (repair manual). Page 6

– 23 –

1. Turn the mode big gear approx. 37 degrees in the arrow direction.
2. Viewing from the front side of the mechanism, verify that the guide ribs
     (CHANGE BOX L/R and STB HOLDER)of tray are as tall as each other.
3. If they are not, bend the lever for adjustment. (Refer to the details.)
Note: Also apply the same adjustment on the R side.

STB HOLDER HEIGHT ADJUSTING METHOD 

47

46

10

11

45

42

LIFT GEAR A

43

41

32

35

40

44

33

30

Mark position

80
TOP PLATE F

37

°

(121)
OS LEVER

Bend this portion to adjust the STB HOLDER

When high

(Narrow the gap.)

When low
(Broaden the gap.)

Adjustment procedure
1. Rotate the MODE BIG GEAR by 37

°

 in the arrowed direction.

2. Check that the guide ribs (CHANGE BOX L/R and STB HOLDER) on the arrowed
    TRAY are at the same height when looked from the front.
3. If they are not, bend the OS LEVER to adjust them. (Refer to the detail drawing.)
Note: Adjust the R portion in the same procedure.

02(102) CHANGE BOX L RIB

03(147) STB HOLDER RIB

03(147) STB HOLDER RIB

04(103) CHANGE BOX R RIB