Read Sharp CD-BA3100 (serv.man2) Service Manual online
CD-BA3100H
– 10 –
T
urn on your system
4
4
1
2
The first time the unit is plugged,
the unit will enter the demonstra-
tion mode.
Y
ou will see words
scroll.
Press the
X-BASS/DEMO button
to cancel the demon-
stration mode.
Press the ON/
ST
AND-BY
button to
turn the power on.
1
Press the CD button.
2
Press the
1
button to open the disc
tray 1.
3
Place the CD on the disc tray 1, label side
up.
4
Press the
1
button to close the disc
tray 1.
5
Y
ou can place discs on the trays 2 - 6 by
following steps 2 - 4.
6
Press the
button to start playback.
Listening to a CD (CDs)
FM stereo mode indicator
FM stereo receiving indicator
1
Press the TUNER (BAND) button repeat-
edly to select the desired frequency
band (FM or
AM).
2
Press the TUNING/TIME (
or
) but-
ton to tune in to the desired station.
When the TUNING/TIME button is
pressed for more than 0.5 seconds, scan-
ning will start automatically and the tuner
will stop at the first receivable broadcast
station.
T
o
receive an FM stereo transmission:
Press the TUNER (BAND) button to display the
“ST” indicator
.
“
”
will appear when an FM broadcast is in ste-
reo.
Listening to the radio
12 cm (5”)
8 cm (3”)
/
If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity
, abnormal sup-
ply voltage due to lightning, etc.) or if it is operated incorrectly
, it
may malfunction.
If such a problem occurs, do the following:
1.
Set the unit to the stand-by mode and turn the power
on again.
2.
If the unit is not restored in the previous operation, un-
plug and plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory
by resetting it.
Clearing all the memory (reset)
1
.
Press the ON/ST
AND-BY button to enter the power
stand-by mode.
2.
Whilst pressing down the MEMOR
Y/SET button and the
X-BASS/DEMO button, press the ON/ST
AND-BY
button
until “CLEAR
AL” appears.
Caution:
This operation will erase all data stored in memory including
clock, timer settings, tuner preset, and CD programme.
Maintenance
Dirty heads, capstans or pinch rollers can cause poor
sound and tape jams. Clean these parts with a cotton swab
moistened with commercial head/pinch roller cleaner or
isopropyl alcohol.
When cleaning the heads, pinch rollers, etc., unplug the
unit which contains high voltages.
After long use, the deck’
s heads and capstans may be-
come magnetised, causing poor sound. Demagenetise
these parts once every 30 hours of playing/recording time
by using a commercial tape head demagnetiser
. Read the
demagnetiser
’s
instructions carefully before use.
Clean the dust or stain on the CD pickup lens using a com-
mercial cleaning disc (brush type).
Listening to a cassette tape (T
APE 1 or T
APE 2)
TAPE 1
TAPE 2
A
C
C
D
E
B
B
A Playback head
B Capstan
D Erase head
E Recording/Playback head
C Pinch roller
TAPE 1
TAPE 2
1
Open the cassette door by pushing the
area marked “
PUSH EJECT”.
2
Load a cassette into the T
APE 1 or T
APE
2 cassette compartment with the side to
be played facing toward you.
3
Press the T
APE (1
2) button to select
the cassette you want to listen to.
4
Press the
button to start playback.
/
Click on the first or last page to see other CD-BA3100 (serv.man2) service manuals if exist.